USD
GBP
EUR
Home Style Ideas
A comparison of MDF and particleboard revealed...
2025-11-04
MDF and particleboard are two of the best-selling types of engineered wood products. When choosing engineered wood products, people often hesitate between MDF and particleboard, feeling helpless. Today, we'll compare MDF and particleboard to help you make a better choice. The highlights and characteristics of MDF: Generally speaking, MDF has a very uniform material composition, each layer is...
Analysis of factors affecting the surface crack resistance of ecological boards
2025-11-04
Abstract Authors: Ye Jiaoyou, Shen Juanxia, Guo Bingtuo Affiliation: Dehua Rabbit Baby Decorative Materials Co., Ltd. Source: *China Artificial Board*, 2018, No. 6. This paper analyzes the effects of impregnated paper bursting strength, uniformity of the equilibrium layer interface material, substrate moisture content, and substrate structural stability on the surface crack resistance of...
2025-11-04
Australian rosewood introduction: Chinese name: Acacia sp. Latin name: Acacia sp. Family and genus: Mimosaceae Genus: Acacia Australian rosewood is about 15-35cm in diameter.
2025-11-04
What is moisture content? Moisture content of wood panels: Wood panels and their products under normal conditions contain a certain amount of moisture. In my country, the percentage of the weight of the water in the wood panel to the weight of the wood panel after it has dried completely is defined as the moisture content. Moisture content can be calculated using the weight of the completely...
What are the production steps and process flow when finger-jointed board manufacturers produce them?
2025-11-04
Finger-jointed boards are mainly made by splicing multiple pieces of wood together. They don't require top-to-bottom gluing or pressing; the vertical joints use a sawtooth pattern, like two hands interlocking, hence the name "finger-jointed board." They are widely used in the furniture manufacturing industry. Today, we'll discuss the production process of finger-jointed board manufacturers....
2025-11-04
Abstract Authors: Yu Haixia, Fang Chongrong, Xu Manping, Gan Meijiao, Yang Weiming, Zhuang Xiaowei Affiliation: 1. Zhejiang Academy of Forestry Sciences, Key Laboratory of Biological and Chemical Utilization of Forest Resources of Zhejiang Province
2025-11-04
Author: Peng Limin; Affiliation: Research Institute of Wood Industry, Chinese Academy of Forestry; Source: *China Wood-based Panels*, 2018, Issue 5. The introduction details the raw material requirements, production process, and hot-pressing technology for impregnated paper-faced plywood and blockboard in my country at the present stage, and analyzes the causes of product defects. Impregnated...
Causes and control measures for indentations and marks on the surface of thin particleboard
2025-11-04
1. Causes and Control Measures for Surface Indentations on Thin Boards Causes: Surface indentations manifest as pits on the board surface after sanding. This is mainly due to residual wood shavings or other debris adhering to the conveyor belt, pre-pressing mesh belt, or press steel belt of the particleboard production line. These debris are not promptly detected and removed, causing them to...
A detailed overview of large formwork construction, summarizing and resolving common problems.
2025-11-04
Undoubtedly, large formwork is widely used due to its advantages such as high construction efficiency, low labor intensity, high turnover rate, and convenient installation and dismantling. Despite its many advantages, the concrete quality may still fail to meet requirements due to inadequate handover and common defects during construction. To avoid quality problems, what issues should be paid...
Take advantage of Black Friday and learn how to buy genuine wood-based panels~
2025-11-04
Today is Black Friday, another shopping spree! Modern people love buying brand names. Although brands tend to be more expensive, they inspire confidence – confidence in quality and after-sales service. So, what to buy...
Wood veneer furniture panels-the "high-end" furniture panels
2025-11-04
What are wood veneer furniture panels? They are made with plywood or multi-layer plywood as the base material, with double-sided or single-sided pure natural solid wood veneer (or engineered wood veneer and stained wood veneer) applied. The panels undergo cold pressing, hot pressing, sanding, and edge trimming processes, and are then finished using imported equipment to create a refined,...
How to distinguish between good and bad boards! Remember these three tips
2025-11-04
Currently, many types of wardrobe materials are available on the market, with solid wood boards, polished particleboard, and MDF being the most common. With so many wardrobe materials available, which one is the best? In recent years, many people have become very fond of European and American style wardrobes, but we still recommend that you consider your own specific needs when making a...
2025-11-04
Why is African rosewood used by so many furniture factories and marketed as mahogany? Some merchants sell fake rosewood as genuine, charging high prices and then trying to bargain down – this is a result of trying to get a bargain. How?
Wood foam – an emerging product (Part 2)
2025-11-04
Experiments with using wood fibers to create foamed or fuzzy materials date back to the 1940s. Waste liquids containing high concentrations of lignin (byproducts of papermaking and fiberboard production) were used as a source of lignin; carbonic acid was added during the process to foam and solidify the mixture. Foaming, on the other hand, was produced by blowing air. Other techniques were...
Oriented strand board (OSB) production capacity continues to grow (Part 1)
2025-11-04
For several years, European oriented strand board (OSB) production and demand have been steadily increasing, giving manufacturers confidence to invest in upgrades and new production lines. According to the European Panel Federation (EPF) 2016/2017 annual report, European OSB production grew by 6.9% in 2016, reaching 5.4 million m³ (compared to 5 million m³ in 2015). While production has been...
Main problems and solutions in the veneer processing of boards
2025-11-04
Veneering is a crucial process in panel furniture production. Veneering materials are used to decorate furniture surfaces, concealing defects and improving the substrate's surface resistance, heat resistance, water resistance, and corrosion resistance. Simultaneously, they can enhance the material's strength and dimensional stability. However, due to varying production methods among companies,...
How to choose wardrobe materials and what are some tips?
2025-11-04
Wardrobes are a very important item in people's lives. When making a wardrobe, we need to choose the right board material, as the quality of the board material directly affects the quality of the wardrobe. So, what kind of board material should we choose? Today, I'll share some tips on how to choose wardrobe board materials. Let's take a look. 1. Check if the board material is genuine....
Differences and advantages of layered compression and solid wood compression
2025-11-04
Funding Project: National Forestry Science and Technology Achievement Promotion Project of the State Forestry Administration, "Promotion and Application of Solid Timber Layered Compression Technology ([2017] No. 25)". Author Biography: Huang Rongfeng (1963-), female, researcher at the Wood Industry Research Institute of the Chinese Academy of Forestry. Research Background: Timber compression...
After furniture is made from particleboard, it needs to be maintained in this way.
2025-11-04
In recent years, eco-friendly boards have become increasingly popular among consumers due to their attractive appearance, paint-free construction, and environmental friendliness. However, many people are unaware of the proper maintenance procedures for furniture made from eco-friendly boards.
Flame-retardant OSB board, truly flame-retardant for peace of mind.
2025-11-04
With the arrival of the Great Heat (a solar term in China), temperatures continue to rise, entering a high-risk period for building fires. Cities with numerous high-rise buildings and dense populations present numerous fire hazards, making fire safety awareness paramount. When choosing materials for renovations, it's crucial to select flame-retardant materials whenever possible. Which brand of...