USD
GBP
EUR
Home Style Ideas
2025-11-04
Introduction: As people gain a deeper understanding of the rosewood industry, many wood enthusiasts ask these two questions: 1. Why do many rosewood appraisal institutions only identify the "class" in their appraisal reports?
2025-11-04
Different types of boards and styles of wardrobes offer different user experiences. Many people find choosing wardrobe boards difficult and don't know which type to choose. Next, we'll analyze the advantages and disadvantages of different wardrobe boards so you can choose according to your needs. 1. Medium-density fiberboard (MDF): MDF is also known as fiberboard, mainly composed of powdered...
Wood foam – an emerging product (Part 3)
2025-11-04
The sponge-like porosity results in a low-density, rigid structure. The density has so far ranged from 40 to 200 kg/m³, varying with the amount of air pumped in, thus affecting the size and proportion of the air chambers. Two mechanisms hold the structure together. One is the natural chemical bond between the wood fibers, initiated by hydrogen peroxide. However, these chemical forces alone are...
How to choose between eco-friendly boards and particleboard
2025-11-04
Currently, eco-friendly boards and particleboard are two types of boards that are gaining popularity among consumers. Next, I'll discuss how to choose between eco-friendly boards and particleboard. Let's take a look. 1. Advantages of Particleboard: Particleboard is mainly made from wood chips produced by a wood chipper, preserving the natural structure of the wood. When soaked in water,...
How to improve the output and efficiency of engineered wood and finger-jointed wood?
2025-11-04
Hello Mr. Shen! I am a reader of *Asian Panel & Furniture* magazine. Our company produces three-layer laminated lumber, primarily using tropical red willow with dimensions of 1-1/8" x 3-1/8". After planing on all four sides, the dimensions are 24mm thick x 72mm wide. The three layers of boards must be similar in color and glued together to form 72mm x 72mm square laminated lumber. The outer...
Do different building types and building materials have a crucial impact on the outcome of a fire?
2025-11-04
On July 25, 2019, we were fortunate to have Professor Len Garis, a Canadian fire safety expert, share some research findings from his study on "Fire Control and Safety of Timber Buildings in Canada." His discussion of fire results across different building types provided us with new insights into the fire safety of timber-framed buildings. Professor Garis pointed out that the study was based...
The art of woodworking, the heart of craftsmanship, the rhythm of planks.
2025-11-04
Solid wood flooring is a type of flooring material made from single veneers, wood pulp, or other wood products through various processes and then finished with various decorative layers. High-quality solid wood flooring has natural tones, clear wood grain, and the material is visible to the naked eye. Solid wood flooring involves rigorously selecting different parts of the same tree species...
Do you know the grading standards for New Zealand radiata pine logs?
2025-11-04
New Zealand radiata pine is undoubtedly a top choice in the timber market, boasting large quantities, wide radii, and numerous uses. Generally, it's graded according to 4m, 6m, and Small A/Medium A/Large A standards, but how exactly is the standard grading determined?
A new type of environmentally friendly high-performance artificial board
2025-11-04
[Application Number] CN201610810268.0 [Application Date] 2016-09-08 [Publication Number] CN106380886A [Publication Date] 2017-02-08 [Applicant] Guangxi Nanning Guierchuang Environmental Protection Technology Co., Ltd. [Address] No. 1218, Haotian Plaza, No. 24 Changhu Road, Qingxiu District, Nanning City, Guangxi Zhuang Autonomous Region, 530022, China [Inventor] Qi Haibing [Patent Agency]...
A bamboo-scented particleboard and its production process
2025-11-04
[Application Number] CN201610582699.6 [Application Date] 2016-07-23 [Publication Number] CN106182315A [Publication Date] 2016-12-07 [Applicant] Wanhua Ecological Board Industry Co., Ltd.
Imported Core Board VS Domestic Core Board | Five Reasons to Prefer Imported Nanmu Wood
2025-11-04
Those with experience in purchasing wood-based panels know that there are significant differences in quality, value, quality control, and ease of processing between panels using imported and domestic cores. So, which is better? Let's compare: Wood Species and Materials. Domestic Cores: To meet market demand, the logs used for cores in the domestic market are mainly fir. These have straight...
2025-11-04
Recently, a friend asked what kind of board material is most suitable for making a wardrobe. There are many types of boards available now, each with its own appeal. Today, we'll discuss some environmentally friendly and healthy boards. One type is called MDF (medium-density fiberboard), and the other is plywood. Both meet current standards and are popular with many people. Compared to other...
Causes and control measures for delamination and coarse particleboard surface
2025-11-04
1. Causes and Control Measures for Thin Board Delamination Causes: Delamination refers to the separation of the bonded surfaces of particleboard due to insufficient glue or poor bonding. Delamination is one of the common defects in thin board production, and its main causes are as follows: 1) Excessive moisture content in the slab. Because the slab in the continuous press moves continuously,...
Waste board recycling system and its improvement measures in particleboard production
2025-11-04
Defective particleboard blanks (waste blanks) produced in particleboard production need to be removed and recycled. Currently, there are two commonly used recycling methods both domestically and internationally: the first is using a scraper conveyor (see Figure 1), and the second is using a pneumatic conveying system (see Figure 2). Each method has its advantages and disadvantages, and each...
Main problems and solutions in the veneer processing of boards
2025-11-04
Veneering is a crucial process in panel furniture production. Veneering materials are used to decorate furniture surfaces, concealing defects and improving the substrate's surface resistance, heat resistance, water resistance, and corrosion resistance. Simultaneously, they can enhance the material's strength and dimensional stability. However, due to varying production methods among companies,...
Good quality materials make good wardrobes and cabinets!
2025-11-04
When judging the quality of wardrobes and cabinets, besides their design, the choice of materials cannot be ignored. Since wood panels constitute the largest proportion of their manufacturing process, they play a crucial role in wardrobes and cabinets.
Differences and advantages of layered compression and solid wood compression
2025-11-04
Funding Project: National Forestry Science and Technology Achievement Promotion Project of the State Forestry Administration, "Promotion and Application of Solid Timber Layered Compression Technology ([2017] No. 25)". Author Biography: Huang Rongfeng (1963-), female, researcher at the Wood Industry Research Institute of the Chinese Academy of Forestry. Research Background: Timber compression...
Wood veneer furniture panels help you create a stylish home.
2025-11-04
Wood veneer furniture panels use high-quality, environmentally friendly multi-layer plywood, blockboard, and formaldehyde-free OSB core board as base materials, and employ a self-developed pure natural soybean plant glue, after...
Is it difficult to make a wardrobe? How do you judge the quality of wardrobe materials?
2025-11-04
Customized wardrobes are now very common. The most important part of wardrobe manufacturing is the board material, and the quality of the board material plays a decisive role in the quality of the wardrobe product. Next, please follow the editor to learn about the relevant information of wardrobe board materials. 1. Common types of wardrobe board materials (1) Plywood: Wood is cut into veneers...
Why do paper-faced gypsum board ceilings turn yellow (Part 3)?
2025-11-04
Recently, I've encountered three cases of yellowing gypsum board. Based on my experience, yellowing ceilings are mostly caused by improper installation. I've previously written two articles summarizing this (Why do paper-faced gypsum board partitions and ceilings turn yellow? Why do paper-faced gypsum board partitions and ceilings turn yellow (Part Two)?). Today, I'll discuss how to correctly...