Home Style Ideas

There are many common misconceptions when buying flame-retardant boards. Have you fallen for any of them?

2025-11-04

Flame-retardant boards, with their ability to suppress open flames, reduce heat, and delay fires, have become one of the best-selling building materials. However, many consumers fall into common misconceptions when purchasing flame-retardant boards. Below, Weiye brand flame-retardant boards share some common mistakes to make when buying flame-retardant boards. First, is flame-retardant board...

Identifying genuine and fake eco-boards by their specifications

2025-11-04

What are the sizes and specifications of eco-friendly boards? The most common sizes of eco-friendly boards on the market are: 1220mm x 2440mm, 1000mm x 2000mm, 1300mm x 2000mm, and 1500mm x 3000mm.

With March 15th approaching, how can you not know these basic facts about wood-based panels?

2025-11-04

Knowledge changes destiny. To ensure you enjoy your rights during the consumption process, you must learn about these common problems with wood-based panels! In daily life, wood-based panels often exhibit the following problems: bubbling, odor, glue seepage, uneven surface, delamination, warping, deformation, cracking, mold, discoloration... At this point, we will explain the professional...

Are darker colors always better for flame-retardant boards?

2025-11-04

Color can influence a person's mood. For example, black gives a sense of dignity and composure; white gives a sense of purity and innocence; and green gives a sense of positivity and health. According to surveys, 67% of a person's first impression of something comes from its color. However, it would be too extreme to directly define a color as a specific personality trait. Social customs and...

Waste board recycling system and its improvement measures in particleboard production

2025-11-04

Defective particleboard blanks (waste blanks) produced in particleboard production need to be removed and recycled. Currently, there are two commonly used recycling methods both domestically and internationally: the first is using a scraper conveyor (see Figure 1), and the second is using a pneumatic conveying system (see Figure 2). Each method has its advantages and disadvantages, and each...

How to distinguish between ebony and rosewood?

2025-11-04

Black sandalwood is a precious wood, and novice collectors may find it difficult to distinguish it from rosewood. Therefore, the editors at Zhongmu.com have compiled methods for differentiating black sandalwood from rosewood: What is black sandalwood? Black sandalwood is a precious wood originating from tropical regions, primarily in Africa. The most distinctive feature of black sandalwood is...

Which type of board is best for making wardrobes? An introduction to the four most common types of board used in wardrobe construction.

2025-11-04

There are many wardrobe products on the market, made from various materials. So, which type of board is best for making wardrobes? This is a question many people have when choosing a wardrobe. Today, we'll introduce some relevant information. Let's take a look. 1. Solid Wood Boards: Solid wood boards are made from natural trees, have a high environmental protection level, and better preserve...

Australian rosewood - Acacia

2025-11-04

Australian rosewood introduction: Chinese name: Acacia sp. Latin name: Acacia sp. Family and genus: Mimosaceae Genus: Acacia Australian rosewood is about 15-35cm in diameter.

If you don't want to use paint when decorating, then choose furniture boards!

2025-11-04

Although paints are becoming increasingly environmentally friendly, some people still dislike them. If asked to name their reasons, they'd list many, such as paint allergies, delays in renovation, inconvenience, and high painter costs. If you're one of those who dislike paint, then furniture boards are a lifesaver for your renovation needs. Because furniture boards come in a variety of types,...

Patent Exhibition | A Microwave Vacuum Drying Method for Round Bamboo

2025-11-04

[Application Number] CN201710330489.2 [Application Date] 2017-05-11 [Publication Number] CN107144096A [Publication Date] 2017-09-08 [Applicant] International Bamboo and Rattan Centre

Continuous Veneer (Edge Banding) Product Introduction

2025-11-04

Product Performance Description: Continuous veneer – Engineered wood edge banding is primarily made of engineered wood veneers, cut to varying widths and thicknesses, and is generally packaged and supplied in rolls. The engineered wood edge banding mainly uses 0.6mm thick engineered wood veneers laminated with imported non-woven fabric. The lamination process uses a combination of hot melt...

A detailed overview of large formwork construction, summarizing and resolving common problems.

2025-11-04

Undoubtedly, large formwork is widely used due to its advantages such as high construction efficiency, low labor intensity, high turnover rate, and convenient installation and dismantling. Despite its many advantages, the concrete quality may still fail to meet requirements due to inadequate handover and common defects during construction. To avoid quality problems, what issues should be paid...

Wood foam – an emerging product (Part 2)

2025-11-04

Experiments with using wood fibers to create foamed or fuzzy materials date back to the 1940s. Waste liquids containing high concentrations of lignin (byproducts of papermaking and fiberboard production) were used as a source of lignin; carbonic acid was added during the process to foam and solidify the mixture. Foaming, on the other hand, was produced by blowing air. Other techniques were...

Patent Exhibition | A Purity Observation Device for Waterproofing Agents for Artificial Boards

2025-11-04

Application Number: CN201720406642.0 Application Date: 2017-04-18 Publication Number: CN206609813U Publication Date: 2017-11-03 Applicant: Suichang County Forestry Chemical Co., Ltd. Address: No. 630, Mudanting Middle Road, Miaogao Street, Suichang County, Lishui City, Zhejiang Province, 323300, China Inventor: Tu Yaping Patent Agency: Hangzhou Zheke Patent Agency (General Partnership) 33213...

A Preliminary Discussion on Adhesive Mixing Systems in Oriented Component Board Production

2025-11-04

Abstract: This paper briefly introduces commonly used adhesives and additives in oriented strand board (OSB) production, as well as the adhesive mixing system. It also briefly compares the application and advantages/disadvantages of two types of adhesive mixers used in OSB production. OSB adhesive mixing involves selecting appropriate adhesives and additives based on the requirements of the...

If your wardrobe is well-designed, how can your clothes be a mess?

2025-11-04

Every morning, I open my closet to find my clothes a complete mess, and I can't find what I'm looking for for ages, which really puts me in a bad mood. Actually, it might just be a problem with the design of my closet.

In-depth analysis | Antique flooring: Unveiling the secrets behind its glitz and glamour

2025-11-04

Antique-style flooring, imbued with keywords like culture, art, concept, and consciousness, has distinguished itself from traditional flooring since its inception, becoming synonymous with fashionable flooring and enjoying widespread popularity. Strictly speaking, antique-style flooring doesn't belong to any specific type of flooring. It's simply a form of flooring expression, possessing...

A comparison of MDF and particleboard revealed...

2025-11-04

MDF and particleboard are two of the best-selling types of engineered wood products. When choosing engineered wood products, people often hesitate between MDF and particleboard, feeling helpless. Today, we'll compare MDF and particleboard to help you make a better choice. The highlights and characteristics of MDF: Generally speaking, MDF has a very uniform material composition, each layer is...

What are the commonly used specifications for engineered timber in construction?

2025-11-04

The most commonly used timber sizes in construction are: 30*50 mm (commonly known as 35 square millimeters), mainly used for suspended ceilings or internal structures; 60*90 mm, rarely seen now, previously primarily used for furniture making; and 120*40 mm, commonly used for door frames. In recent years, China has seen large-scale real estate development, with high-rise buildings everywhere,...

Furniture Odor Source Analysis and Control Technology

2025-11-04

Authors: Liu Ru, Huang Anmin, Wang Chen, Lü Bin; Affiliation: Research Institute of Wood Industry, Chinese Academy of Forestry; Funding Project: Key Research and Development Program of the 13th Five-Year Plan, "Energy Saving and Consumption Reduction and Production Safety Control Technology in Wood Industry," Project "Research on Health and Safety Performance Testing and Evaluation Technology...

123456 14
Turn to
GO