How to clean eco-friendly board furniture?

Home renovation requires stocking up on a large quantity of eco-friendly building materials, and many custom-made furniture pieces are also made from these materials. However, problems such as contamination of these materials are common. So, how do you clean eco-friendly building materials? Below is some information compiled by Huangguoshu for your reference based on your specific situation.

1. For juice and paint stains on eco-boards, acetone can be used to wipe them off. This not only easily cleans the stains but also does not affect the appearance of the eco-board, while keeping it well-maintained.

2. If there are pencil marks on the eco-board, the eco-board manufacturer will use methanol alcohol to wipe the pencil marks off the eco-board. This will not harm the eco-board and can also clean it quickly.

3. If the eco-board gets stained with ink, lipstick, ink, or similar substances, it is recommended to use a small amount of alcohol to clean it, followed by a mild detergent, and finally wipe it clean with a damp, wrung-out cloth.

4. If there are stains such as tea, coffee, or strong adhesive on the eco-board, you can use toluene solvent to wipe it. Using toluene solvent is very convenient for removing stains such as tea, and the cleaning is quick and easy without causing any damage to the eco-board.

5. If there are strong labels on the eco-board, it is best to wipe them off with a towel, because the surface of the eco-board is melamine, which is wear-resistant, but it can still be damaged if you scratch it with a hard object.

6. For dirt that cannot be easily wiped off, use a lint-free cotton cloth dampened with a mixture of white spirit and water to clean it, then wipe it with a cotton cloth dampened with a suitable amount of water, and dry it immediately after wiping. The eco-board will still be as shiny as ever after wiping in this way.

What if you don't have methanol, acetone, or toluene at home?

1. Clever use of dish soap

Dish soap can also remove stains from PVC boards. If the stain is not large and has just been applied, dish soap can easily remove it.

2. Use flour to remove oil stains

This method is uncommon, but the results are quite good. Take three spoonfuls of flour and put them in a small bowl. Add water and stir to make a paste. Then, spread the paste on both sides of the stain on the eccentric board and expose it to the sun. Once the paste dries, rub off the flour with your hands, and the eccentric board will be as bright and white as new.

3. Use diluted salt water to remove stains

For stains on eco-friendly boards, a diluted salt water solution is also a good cleaning agent. Before cleaning the eco-friendly boards, add an appropriate amount of salt to the water, stir until it is completely dissolved, and then you can clean the stains normally.