Is eco-board a type of wood board? Is eco-board a type of wood board or a type of plywood?

During the renovation process, many different types of boards are used to make various kinds of furniture. For example, eco-boards are a commonly used type of board because they don't require staining, so furniture made from them can be used immediately. Below, we'll introduce what eco-boards are and analyze their advantages and disadvantages.

I. What is an ecological board?

Eco-board, also known by many names in the industry, is commonly referred to as melamine board or pre-finished board. It is based on the production process of impregnated paper-faced engineered wood panels. Through reform and innovation, it has been researched and produced using plywood and blockboard as raw materials. Eco-board boasts advantages such as moisture resistance, aging resistance, insect resistance, and mold resistance. Furthermore, the color of the board can be freely matched, and installation is particularly convenient; it can be used immediately without painting. Additionally, the color of the board will not fade over time. Its simple operation makes it an excellent choice for decorative panels.

II. What is an eco-board? What are the advantages of an eco-board?

1. Ecological board is also known as paint-free board, which means that no paint is sprayed during the manufacturing process. Ecological board has a relatively low content of harmful substances throughout the entire process, so it is an excellent choice for making furniture, cabinets and other items in terms of environmental protection.

2. Since no painting is required, the furniture or cabinets can be used immediately after they are assembled, saving time and money associated with painting.

3. Compared to solid wood boards, eco-boards offer superior functionality and a higher degree of flatness. Eco-boards are less prone to discoloration or peeling during use, exhibit virtually no color difference, and have a beautiful and smooth appearance.

4. Ecological boards also have functions such as heat resistance, moisture resistance, and fire resistance, so there is no need to apply waterproof and anti-corrosion coatings.

III. What is an eco-board? What are the disadvantages of eco-boards?

1. Ecological boards have fewer disadvantages than advantages. The most important thing to pay attention to is the issue of collisions and friction. Ecological boards cannot be frequently impacted, as they are easily damaged by impacts, and once damaged, they cannot be repaired.

2. Ecological boards are prone to paint peeling and color fading if used for too long.

3. The production process of ecological boards requires high precision in the cutting and edge banding. Rough workmanship can easily cause the ecological boards to crack, resulting in waste of the boards.

What is an eco-board?

Ecological board, also known as paint-free board or melamine board, was originally called melamine board. However, due to the contamination incident of dairy products in China, it was forced to change its name. In the industry, it is generally called paint-free board. Some people also call it ecological board, but ecological board is too general because many boards that meet the ecological and environmental protection standards can also be called ecological board, which is easy to confuse.

Ecological boards have several names in the industry, the most common being paint-free boards and melamine boards.

Eco-friendly organic boards are an upgraded version of traditional eco-friendly boards, with higher standards in material sourcing, processing, and environmental protection.

Melamine is one of the resin adhesives used in the manufacture of eco-friendly boards. Paper with different colors or textures is soaked in the resin, dried to a certain degree of curing, and then laminated onto the surface of particleboard, medium-density fiberboard, or hardboard. The resulting decorative board is hot-pressed. The standard name is melamine-impregnated paper-faced artificial board. Calling it a melamine board actually refers to part of its surface component.

Extended Information:

Introduction to Eco-boards:

Eco-friendly boards use natural mineral stone powder and natural fibers as base materials, with a melamine veneer applied to a plywood base. They contain low levels of harmful substances such as formaldehyde and benzene, making them a relatively environmentally friendly material. Eco-friendly boards are waterproof, anti-aging, and highly decorative, suitable for both indoor and outdoor use.

Eco-board is a type of board that combines the diverse colors and surfaces of moisture-resistant wood with finger-jointed wood, but eliminates the need for painting and avoids monotony. It is a newer, higher-end supplementary board material. In terms of environmental protection, good quality eco-boards generally meet the E1 standard.

Reference source:

Baidu Baike - Eco-board

Eco-friendly boards are made by splicing together plywood and directly pressing a veneer onto the surface, eliminating the need for a painting process. They use natural mineral stone powder and natural fibers as base materials, primarily applying a melamine veneer to a plywood base. They are formaldehyde-free, benzene-free, and relatively environmentally friendly. Features include waterproofing, anti-aging properties, and strong decorative appeal. Suitable for both indoor and outdoor use. Simply put, they combine the diverse colors and surfaces of moisture-resistant boards with the wood of finger-jointed boards, but without the need for painting and a monotonous appearance. Currently, they are considered a new, higher-end supplementary material. Their environmental friendliness is acceptable; generally, better eco-friendly boards can meet the E1 standard. Brands such as Hong Kong Xuebao, Tu Baobao, and Moganshan are among the better eco-friendly board manufacturers.

Eco-friendly organic boards are an upgraded version of traditional organic boards. They meet higher standards in everything from material sourcing and processing to environmental protection. For example, traditional organic boards may be usable from trees over 30 years old, but eco-friendly organic boards are generally made from trees over 50 years old. The manufacturing process is also more stringent than traditional organic boards, and the environmental standards for eco-friendly organic boards are close to the E0 standard. The E0 standard is currently the highest international health standard, and very few domestic companies meet it. Only countries with high requirements for board materials, such as Canada, can achieve this standard. To make a simple comparison, the formaldehyde content of E0 standard eco-friendly organic boards is lower than the formaldehyde content of drinking water purchased on the market.

Of course, the most important advantages of eco-friendly organic boards compared to traditional organic boards are their healthier and more durable nature. If there are children or people with pharyngitis or other conditions that make them sensitive to formaldehyde, it is recommended to choose E0-grade organic boards. Especially in cities with severe smog, where the incidence of respiratory diseases is high, ordinary standard boards are a significant contributing factor to these illnesses. Also, because eco-friendly boards skip the painting process, their surface decorative layer will generally fade, lasting anywhere from 2-3 years to 5-6 years. If you want a longer lifespan and want to avoid needing to renovate again soon, you can consider using eco-friendly organic boards, which typically have a lifespan of over 15 years. Naturally, due to the strict standards, eco-friendly organic boards are more expensive than traditional organic boards, placing them in the upper-middle range of consumer spending.

As we all know, the wholesale market for furniture timber offers a wide variety of boards, but their quality varies greatly. Many boards are of high quality and meet hygiene standards, ensuring peace of mind for consumers. Ecological boards are a common type of wood panel on the market, but many people have questions about their quality and therefore ask whether they are environmentally friendly.

I. What is an eco-friendly board?

There are many types of wood boards on the market now. Due to the different compositions, the appearance and names of wood boards also vary. Ecological boards are made of plywood or solid wood as the core, and then a layer of very environmentally friendly melamine sticker is applied to the surface. Because the entire board is very environmentally friendly and does not require additional processing, it is generally called ecological board. The biggest feature of ecological board is that it is very eco-friendly. It does not produce additional formaldehyde during processing and does not cause any harm to the human body.

II. Are eco-friendly boards environmentally friendly?

Is eco-friendly board environmentally friendly? According to scientific testing, eco-friendly board truly achieves environmental protection. While other wood boards may have some hardeners or glues added during processing, eco-friendly board can minimize the harm of these glues or hardeners, and will not cause any excessive harm to the human body. It can effectively protect the human body. Everyone living in an environment with furniture made of eco-friendly board will not have any risk of cancer or formaldehyde inhalation, making it very safe.

We have now introduced the relevant information about whether eco-friendly boards are environmentally friendly. When selecting materials in the furniture wholesale market, you can give priority to eco-friendly boards with ecological effects, so that you can live in them with peace of mind and protect your health.

Boards can be broadly classified into plywood, particleboard, fiberboard, finger-jointed solid wood board, particleboard, and multi-layer solid wood board.

Plywood (commonly known as blockboard)

Blockboard (also known as core board) is a type of plywood with a solid wood core. It has poor vertical (distinguished by the direction of the core material) bending and compressive strength, but relatively high horizontal bending and compressive strength. Most blockboard on the market today is solid, glued, double-sanded, and five-layered, making it one of the most commonly used building materials in decoration.

advantage:

A. Plywood has good screw holding power, high strength, and is characterized by its hardness, sound absorption, and heat insulation. Plywood has a low moisture content, between 10% and 13%, and is easy to process. It is widely used for furniture, doors and windows, partitions, false walls, radiator covers, curtain boxes, etc.

B. Because the interior is made of solid wood strips, the requirements for processing equipment are not high, making on-site construction convenient.

shortcoming:

A. Because urea-formaldehyde glue is used extensively in the production of plywood, the formaldehyde release is generally high and the environmental protection standards are generally low, which is why most plywood has a pungent smell.

B. Currently, most plywood on the market is produced with substandard materials, resulting in large gaps when splicing solid wood strips and widespread voids inside the boards. If nails are driven into these gaps, they have virtually no holding power.

C. The solid wood strips inside the plywood are spliced ​​longitudinally, so the vertical bending and compressive strength is poor, and long-term stress will cause the board to deform significantly laterally.

D. The solid wood strips inside the plywood are made of different materials and have different densities. They have only undergone simple drying treatment and are prone to warping and deformation. The structure becomes twisted and deformed, affecting the appearance and performance.

E. Because the surface of plywood is relatively rough, a large amount of glue or paint is usually used when processing the surface on-site. Therefore, furniture made from this board is extremely environmentally unfriendly. This is also the main reason why the smell is so pungent during decoration. Such on-site made furniture is the culprit for causing cancer and gene mutations, and it is very harmful to the human body.

Particleboard

Particleboard is a type of engineered wood product made by cutting various branches, small-diameter timber, fast-growing wood, wood chips, etc. into fragments of a certain size, drying them, mixing them with adhesives, hardeners, waterproofing agents, etc., and pressing them under certain temperature and pressure. It is called particleboard because its cross-section resembles a honeycomb.

Adding certain "moisture-proofing factors" or "moisture-proofing agents" to the interior of particleboard creates what is commonly known as moisture-proof particleboard, or simply moisture-proof board. It does offer some moisture resistance because particleboard itself has strong moisture-proof properties and a low expansion coefficient after absorbing moisture, making it widely used in environments such as kitchen cabinets and bathroom vanities. However, in reality, it has become a tool for many inferior particleboards to conceal their internal impurities. Adding green dyes to particleboard further creates what is currently called "green-based particleboard," which many manufacturers use to mislead consumers into believing it is an environmentally friendly board, but this has no scientific basis. Top-tier domestic and international brands of particleboard mostly use their natural-colored base material.

advantage:

A. It has good sound absorption and sound insulation properties; particleboard has heat insulation and sound absorption properties.

B. The internal structure consists of interlocking granules, with similar performance in all directions and a relatively uniform structure, resulting in good nail-holding power and good lateral load-bearing capacity.

C. It has strong moisture-proof properties and a small expansion coefficient after absorbing moisture, making it widely used as a raw material for cabinet products such as kitchen cabinets and bathroom vanities in humid environments.

C. Particleboard has a smooth surface, realistic texture, uniform density, small thickness error, is resistant to pollution and aging, and is beautiful. It can be painted and veneered in various ways.

F. Particleboard uses less glue during production, resulting in a relatively high environmental protection coefficient.

shortcoming:

A. Its internal granular structure makes it difficult to mill.

B. It is easy to cause tooth breakage during board cutting, so the requirements for processing equipment are relatively high.

Fiberboard (also known as MDF)

Fiberboard is made primarily from plant fibers through processes such as hot grinding, gluing, laying, and hot pressing. Fiberboard is classified by density: low-density fiberboard (LDF) has a density below 450 kg/m³, medium-density fiberboard (MDF) has a density between 450 and 800 kg/m³, and hardboard (HDF) has a density above 800 kg/m³. MDF is mainly used in the production of finished furniture, and also in engineered wood flooring, door panels, and partitions.

advantage:

A. The fiberboard has a smooth and flat surface and a fine texture, which makes it easy to shape and mill.

B. Fiberboard has good toughness and is not prone to breakage when the thickness is small (such as 6mm, 3mm).

shortcoming:

A. Fiberboard has poor moisture resistance and a large expansion coefficient after absorbing moisture.

B. The fiberboard has a powdery internal structure, resulting in poor nail-holding power; screws can easily loosen after being tightened.

C. Due to the low strength of fiberboard, the height of furniture made from it cannot be too high, and most of them are 2100mm.

E. Due to its internal structural characteristics, fiberboard requires a large amount of glue during production, resulting in a lower environmental protection coefficient to some extent.

Solid wood finger-jointed board

Finger-jointed board, also known as engineered wood, is a type of board made by splicing together small pieces of solid wood that have undergone deep processing, much like interlocking fingers. Because the boards are joined with a serrated joint, similar to the interlocking of two fingers, it is called finger-jointed board. Since the wood strips are interlocked, this joint structure itself has a certain bonding strength, and because no surface panels are glued on top or bottom, the amount of glue used is extremely small.

Advantages: Due to fewer joints and less glue used in solid wood panels, the environmental protection coefficient is relatively high. It is easy to process, allowing for cutting, drilling, sawing, and shaping.

Disadvantages: Solid wood finger-jointed boards are prone to warping and cracking. Good quality solid wood finger-jointed boards offer guaranteed quality but are more expensive.

Particleboard

So-called solid wood particleboard is actually a type of board produced using the same process as particleboard, and it is a homogeneous particleboard.

Homogeneous particleboard, scientifically known as oriented strand board (OSB), is a type of engineered wood product made from small-diameter timber, thinnings, core wood, veneer, and branches. These materials are processed using specialized equipment into particleboard sheets measuring 40mm, 70mm in length, 5mm, 20mm in width, and 0.3mm, 0.7mm in thickness. After drying, gluing, and oriented strands (core and surface layers) using specialized equipment, the sheets are laid out in a crisscross pattern and then hot-pressed to form the final product. Homogeneous particleboard, with its particleboard sheets dried using an advanced single-channel dryer, has a low coefficient of expansion and excellent moisture resistance. The oriented layering of the particleboard sheets results in a uniform internal texture, giving it superior nail-holding power, bending strength, and stability compared to ordinary particleboard and powdered MDF.

Oriented strand board (OSB) is widely used by furniture manufacturers in Europe and America as a high-end and environmentally friendly substrate, and the domestic high-end panel furniture market has also begun to adopt this type of board on a large scale.

Multi-layer solid wood board

Multi-layer solid wood boards are made of multi-layer plywood with crisscrossing layers as the base material, and the surface is covered with high-quality solid wood veneer or engineered wood. They are made through several processes such as cold pressing, hot pressing, sanding, and curing.

Multi-layer solid wood boards are favored by consumers because they are resistant to warping and have excellent properties for regulating indoor temperature and humidity. The surface veneer material also offers the natural texture and feel of real wood.

Multi-layer solid wood boards possess excellent structural stability, are not easily deformed, and are sturdy. Through cross-lamination and high-temperature, high-pressure bonding, the deformation defects of solid wood boards are resolved by addressing internal stress. The use of self-made, high-quality, environmentally friendly adhesives in the production process ensures that the formaldehyde emission limits of the product meet national standards, making it green and environmentally friendly.

What is solid wood eco-board made of?

Solid wood eco-board is a type of eco-board, made by gluing and hot-pressing multiple layers of veneer or thin wood boards. Plywood is generally available in six thicknesses: 3mm, 5mm, 9mm, 12mm, 15mm, and 18mm (1mm is 1mm). It meets environmental standards of E1 and E0, and is currently a commonly used material for handmade furniture. Overall, it offers a relatively high cost-performance ratio.

Solid wood eco-boards are sturdy and durable, with natural grain patterns. Most possess the unique aroma of natural wood, have good moisture absorption and breathability, are beneficial to human health, and do not cause environmental pollution. They are high-quality boards for making furniture and decorating homes. Some special materials (such as beech) are also ideal materials for manufacturing precision instruments.

Is solid wood eco-board made of solid wood?

Solid wood eco-board, as the name suggests, uses high-quality, machine-assembled Indonesian Malacca and fir plywood as its base material, covered with melamine veneer paper, and then pressed together with adhesive in a hot press. This eliminates the need for painting; it can be directly cut, and the edges are sealed with eco-board edge banding. A key feature of solid wood eco-board is its resistance to corrosion; unlike traditional wood flooring, it won't rot easily when exposed to even small amounts of corrosive liquids. Of course, some vendors like to attach "solid wood" to the eco-board, simply to satisfy consumers' desire for authentic solid wood.

What is solid wood particleboard made of?

What is particleboard made of? Many users are unsure about the material composition of particleboard. Below, we'll explain what particleboard is made of. Let's take a brief look!

Solid wood particleboard is a type of engineered wood product made from wood or logs. The logs are broken down, with fine wood fibers on both sides and long wood fibers sandwiched in the middle. After applying adhesive, the boards are bonded together under heat and pressure. The surface of the board is made of melamine with a honeycomb-like cross-section.

Solid wood particleboard is a type of engineered wood product made from small-diameter timber, thinnings, wood cores, veneer, branches, etc., processed into shavings with lengths of 40mm and 70mm, widths of 5mm and 20mm, and thicknesses of 0.3mm and 0.7mm using specialized equipment. After drying, gluing, and arranging the surface and core layers of shavings in a crisscross pattern using specialized equipment, the shavings are then hot-pressed into shape.

Solid wood particleboard is a type of chipboard. This type of board has a smooth and delicate surface, free from defects such as knots and wormholes, and has good stability and uniform material.

Solid wood eco-board is a type of board made from whole logs.

It is a type of board made from whole logs, and is usually classified according to the name of the board material, without a unified standard. This type of board is sturdy and durable, with natural grain patterns, and it has good moisture absorption and breathability, does not cause environmental pollution, and is beneficial to human health.

Solid wood eco-board is a type of eco-board, made by gluing and hot-pressing multiple layers of veneer or thin wood boards. Plywood is generally available in six thicknesses: 3mm, 5mm, 9mm, 12mm, 15mm, and 18mm (1mm is 1mm). It meets environmental standards of E1 and E0, and is currently the most commonly used material for handmade furniture. Overall, it offers a relatively high cost-performance ratio.

Advantages of solid wood eco-board

1. It has strong nail-holding power. Nail-holding power determines whether the board can be used for a long time and is also one of the parameters to verify the material quality of the board itself, which can increase the stability of custom furniture.

2. Solid wood eco-boards are more environmentally friendly because they don't require painting. Whether it's new home renovation, custom furniture, or general home improvement, no matter how good the paint advertisements are, there will always be some formaldehyde residue after painting. We have to wait for the formaldehyde to be released, and these gases are harmful to the human body.

3. Solid wood eco-boards have fewer color options, making them suitable for a range of furniture and decorations, including wardrobes, kitchen cabinets, wine cabinets, TV cabinets, shoe cabinets, partitions, and bar counters.

4. Solid wood eco-boards have strong moisture resistance. Kitchen cabinets, bathroom storage cabinets, bathroom doors, and other furniture are susceptible to moisture damage. Using solid wood eco-boards can effectively solve this problem.

Ecological boards have two concepts: a narrow one and a broad one.

In a broad sense, ecological board is equivalent to melamine-faced board, and its full name is melamine-impregnated paper-faced artificial board.

It is a decorative board made by soaking paper with different colors or textures in ecological board resin adhesive, drying it to a certain degree of curing, laying it on the surface of particleboard, moisture-proof board, medium density fiberboard, plywood, blockboard or other hard fiberboard, and then hot pressing it.

In a narrow sense, eco-friendly boards refer only to melamine-faced panels whose core material is spliced ​​solid wood (such as Malacca wood, cedar, paulownia wood, poplar, etc.). They are mainly used in furniture, cabinets, wardrobes, bathroom vanities, and other related fields.

Ecological boards are made of melamine-bonded medium-density fiberboard, particleboard, plywood, and other substrates.

Eco-friendly boards are made from melamine. Firstly, this type of board is heat-resistant, and also has good moisture and fire resistance, so it is commonly used in home wardrobes, cabinets, and various types of panel furniture.

Secondly, environmentally friendly ecological boards are not prone to discoloration and will not easily peel during daily use. Even after many years of use, they still look new and have a high-quality feel, which is why furniture manufacturers prefer this type of board. Thirdly, environmentally friendly ecological boards are also a composite, paint-free material, making them low-carbon and environmentally friendly in use, with relatively low emissions of harmful substances.

Extended Information:

High-quality eco-friendly boards have a certain degree of hardness on their surface. Furniture made from them does not need to be painted, as a protective film naturally forms on the surface, making it wear-resistant, scratch-resistant, acid and alkali-resistant, heat-resistant, and stain-resistant.

When choosing eco-friendly board furniture, in addition to considering the color and texture, consumers can also distinguish the appearance quality from several aspects: whether there are stains, scratches, dents, branch counts and pores, whether the color and gloss are uniform, whether there are bubbles, and whether there are local paper tears or defects, etc.

If the veneer cracks or breaks, first place a damp cloth over the damaged area, then place a hot iron on the cloth to force moisture into the veneer, making it more resilient and less prone to cracking. For cracked edge banding, first scrape off the old adhesive, then apply a layer of white glue to the base wood, followed by a layer of new glue on the reverse side of the loose edge banding, pressing it firmly. Allow the glue to dry completely.

Ecological boards have two concepts: a narrow one and a broad one.

In a broad sense, eco-board is equivalent to melamine-faced board. Its full name is melamine-impregnated paper-faced engineered wood panel. It is made by impregnating paper with different colors or textures in eco-board resin adhesive and drying it to a certain degree of curing. It is used in particleboard, moisture-resistant board, medium-density fiberboard, plywood, etc.

Decorative panels made by hot pressing the surface of plywood or other hard fiberboard.

In a narrow sense, eco-friendly boards refer only to melamine-faced panels with spliced ​​solid wood as the core material, mainly used in furniture, cabinets, wardrobes, bathroom cabinets and other fields.

Extended Information:

When choosing eco-friendly board furniture, in addition to considering the color and texture, consumers can also distinguish the appearance quality from several aspects: whether there are stains, scratches, dents, pores, whether the color and gloss are uniform, whether there are bubbles or dents, whether there are local paper tears or defects, etc.

If the veneer cracks or breaks, you can first place a damp cloth on the damaged area, and then place a hot iron on the damp cloth to force the moisture into the veneer, making the veneer more resilient and less prone to cracking.

If the edge banding cracks, first scrape off the old glue, then apply a layer of white glue to the base wood, then apply a layer of new glue to the reverse side of the loose edge banding, press it firmly, and wait for the glue to dry completely.

Ecological board is a decorative board made by soaking paper with different colors or textures in melamine resin adhesive, drying it to a certain degree of curing, and then laying it on particleboard, moisture-proof board, medium-density fiberboard, plywood, blockboard or other solid wood boards and hot pressing it. Da Wang Ye chose to press blockboard and plywood together. According to the national standard name: impregnated paper-faced blockboard and plywood, commonly known as ecological board.

Are eco-friendly boards environmentally friendly?

The melamine film formed after the eco-board is soaked in melamine resin is much stronger. This melamine film is heat-pressed together with the substrate and has excellent properties. Furniture made with this eco-board does not need to be painted. The surface naturally forms a protective film that is wear-resistant, scratch-resistant, acid and alkali resistant, heat-resistant, and stain-resistant.

Da Wang Ye ecological boards have a high environmental protection level, reaching the E0 national standard. Unlike traditional melamine boards, they no longer have an odor and have a faint, fresh wood fragrance. Da Wang Ye ecological boards are also a drafting unit of national standards and are well-liked by consumers.

Ecological boards have many names in the industry, but they are commonly referred to as melamine boards or paint-free boards. They are based on the production process of impregnated paper-faced engineered wood panels, and through reform and innovation, have been developed to produce boards made from plywood and blockboard.

Are eco-friendly boards environmentally friendly?

Ecological boards are a green, environmentally friendly, and pollution-free decorative material. Because they do not require painting, they avoid secondary pollution. As a new type of product, they combine the functions of veneer and plywood. In home decoration, ecological boards save production processes, increase product added value, and save consumers decoration costs and labor costs. They are leading a new trend in home decoration and becoming a new favorite in the home decoration industry.

Features of Eco-board

Ecological boards have vibrant colors and luster, and can imitate the texture of natural wood. They are also smooth, flat, and very beautiful.

Ecological boards have good performance, are not easily deformed, are wear-resistant, scratch-resistant, corrosion-resistant, high temperature-resistant, waterproof, fireproof, and easy to clean, making them a good choice for furniture making materials.

Uses of ecological boards

Eco-friendly boards are aesthetically pleasing, easy to install, environmentally friendly, and wear- and scratch-resistant, making them widely applicable. Their uses range from custom office supplies to home renovations. For example, they can be used in home decoration, panel furniture, cabinets, wardrobes, bathroom vanities, and more.

Ecological boards have two concepts: a narrow one and a broad one.

1. In a broad sense, ecological board is equivalent to melamine-faced board. Its full name is melamine impregnated paper-faced artificial board. It is made by soaking paper with different colors or textures in ecological board resin adhesive, drying it to a certain degree of curing, laying it on the surface of particleboard, moisture-proof board, medium density fiberboard, plywood, blockboard or other hard fiberboard, and then hot-pressing it into a decorative board.

2. In a narrow sense, eco-friendly boards refer only to melamine-faced panels whose core material is multi-layer solid wood (plywood) or blockboard (such as Malacca wood, cedar, paulownia wood, poplar, etc.). They are mainly used in furniture, cabinets, wardrobes, bathroom vanities, and other fields.

Blockboard, also known as core board, is made by gluing and pressing together veneers and other wood panels. The core panels are made by drying wood planks, processing them into strips of a specific size, and then splicing them together using a panel splicing machine. Two layers of high-quality veneer are then applied to each side of the spliced ​​panels, and finally, they are pressed together using cold and hot presses. Compared to particleboard and medium-density fiberboard (MDF), its natural wood properties are better suited to human needs; it is lightweight, easy to process, has good nail-holding power, and does not warp, making it an ideal material for interior decoration and high-end furniture manufacturing.

Plywood is essentially a type of eco-friendly board, and it also falls under the category of paint-free boards.

There are many types of boards on the market, with eco-friendly boards being a common choice. With advancements in production technology, new types of boards have emerged, such as plywood. So, do you know the difference between eco-friendly boards and plywood? Which one is more suitable for home decoration, and how should we choose?

Which is better, eco-friendly board or plywood? What are the differences between them?

Most people are familiar with eco-friendly boards, which are often used in bedroom, living room, and wardrobe decoration. So what is blockboard? Blockboard, also known as plywood, is made from natural wood panels that have been dried and processed. These two types of boards are the most common types of wood panels, and many people easily confuse them. Blockboard has high strength and good stability, and is easy to process. However, a drawback of blockboard is that it is susceptible to moisture, so it should never be used in the kitchen during renovations.

Ecological boards are strong, wear-resistant, and heat-resistant. They retain the texture of natural wood, have a beautiful appearance, are easy and quick to install, and are not easily deformed, making them an excellent material for decoration at an affordable price. The biggest difference between plywood and ecological boards is that plywood doesn't have a veneer. When using it to make furniture, a layer of paint is applied separately. However, excessive paint can produce formaldehyde, which may affect human health. Therefore, this is an important consideration when purchasing.