To determine the quality of a board material, consider these five key points.

For furniture, the most important part is the board material. Boards from different brands may look very similar, but the lifespan of wardrobes made from them can vary greatly. This is because their basic parameters differ. So, how do you judge whether a board material is good or bad? Let's find out together with Weiye brand boards.

I. Static bending strength

What is static bending strength? It's a property that measures whether a cabinet will deform or break. The higher the static bending strength, the stronger its resistance to bending damage. It's related to the raw materials and manufacturing process. If the tree's age is too short, the static bending strength value will be low. Trees aged 25-30 years have the best static bending strength value and the most stable physical properties. In addition, proper manufacturing processes can make the board structure stable and less prone to warping and deformation.

II. Formaldehyde Emission

Adhesive is a source of formaldehyde. When formaldehyde release reaches a certain concentration, it can cause significant damage to the eyes, nose, and respiratory system, or even cause illness. Weiye brand maternity and infant room boards use self-produced environmentally friendly adhesive, completely eliminating the harm of formaldehyde, benzene, and other harmful substances to the human body from the source of production, while retaining the natural fragrance of wood. It is the first choice for home decoration.

III. Water Absorption Swelling Rate

During use, the thickness and length of wood panels may change due to variations in air humidity, and warping may occur. Water absorption swelling rate is an indicator of a wood panel's moisture resistance. The water absorption swelling rate is not only related to the raw wood material, but also directly affected by factors such as surface protection, edge banding techniques, the presence of excess glue, and glue peeling.

IV. Screw holding force

The nail-holding power of a board refers to how easily a nail can be secured in the nail hole after it has entered the board, and whether it is easy for the nail to loosen and fall out. Furniture made from boards with good nail-holding power is less likely to loosen, fall out, chip, make abnormal noises, or deform. The amount of nail-holding power depends on factors such as the type of wood, moisture content, density, hardness, elasticity, grain direction, nail shape, the size of the wood contact surface, and the manufacturing process.

V. Appearance of the Board

High-quality boards should have fine and uniform material, beautiful wood grain, no delamination, no bulging or delamination, and a smooth surface without obvious defects, such as burrs, cracks, knots, bark inclusions, resin pockets, planing marks, gaps and wormholes, glue seepage, and surface contamination.

Panel materials play a vital role in industries such as furniture, and consumers can use the above five points as selection criteria. Founded in 1996, the company is committed to promoting environmentally friendly panel materials, improving the human living environment, setting industry standards, and being a responsible, reliable, and sustainably operating enterprise. It has been repeatedly recognized as one of China's top ten panel material brands.