You must know these misunderstandings about boards!

Boards are essential materials for decoration, but how to choose them? Many people are confused. Today, Weiye Boards has sorted out several misunderstandings about board selection and recommends that consumers avoid them when choosing boards.

Misconception 1: To identify the board, only look at the appearance?

It is impossible to fully identify the quality of the board by just looking at the appearance, because inferior boards confuse consumers through "dressing up and decoration", but in fact they are roughly made, the core layer is black and rotten, and there are large gaps. The appearance is no different from high-quality boards, but the internal quality is a world of difference. Therefore, appearance cannot be used as a standard to measure the quality of boards.

Misconception 2: The thicker the board, the better the quality?

In theory, thicker boards are stronger and have better nail-holding power, leading consumers to believe that thicker boards are better quality. However, consumers don't need to be overly concerned with board thickness; as long as it meets the standard, it will meet their needs. For example, a wardrobe door primarily serves as a barrier, and excessive thickness can increase the weight of the hardware and shorten the wardrobe's lifespan.

Misconception 3: No odor, no formaldehyde?

The fact that the board has no odor does not mean that there is no formaldehyde. It is a gas that is extremely difficult to volatilize. Even when the concentration exceeds the standard by 2-3 times, people cannot smell any obvious odor. But in fact, when the concentration exceeds the standard by 2-3 times, it already constitutes mild pollution and will have adverse effects on human health. It is unscientific to judge whether there is formaldehyde based solely on the presence or absence of odor.

Misconception 4: Imported panels are of the best quality?

When purchasing panels, some consumers tend to prefer expensive imported panels. In fact, the quality of products from large domestic panel companies is not worse than imported ones. They meet national standards in terms of environmental protection level and performance. Consumers do not have to be too superstitious about foreign brands, but should choose according to their economic capabilities.

Misconception 5: Tight edge sealing can seal out formaldehyde?

Formaldehyde is as fierce as a tiger. Many people think that tight edge sealing can seal out formaldehyde. This view is actually wrong because the total amount of formaldehyde in the board is fixed. Even if it is tightly sealed, formaldehyde will continue to be released, but the speed per unit time will be slower.

The board is one of the top ten brands of Chinese board. It is market-oriented, survives by quality, and takes deep development of science and technology as its development purpose. It is committed to creating new technologies and products for energy conservation and environmental protection, and has become the most popular board brand in the market.