What is the best board material for making cabinets? What is the best board material for custom cabinets?

For wardrobe use

Fir board, solid wood board, melamine board, wood board, and wheat board.

1. Fir board

Fir board, also known as finger-jointed board, is made from small pieces, requiring glue at all joints. Secondly, the wood is relatively soft, lacking strength and prone to deformation and cracking. Third, its surface is uneven, easily scratching clothing. The solution is sanding and painting, which is expensive, odorous, and environmentally unfriendly. Third, the paint is prone to discoloration, cracking, and flaking. Fourth, it is prone to insect infestation and difficult to maintain.

2. Solid wood board

Board Introduction: Solid wood furniture is made from natural wood, and the wood's true pattern is generally visible on the surface. Pure solid wood furniture means that all materials used in the furniture are solid wood, including the tabletop, wardrobe doors, side panels, etc., which are all made of pure solid wood, without any other form of artificial board.

Pure solid wood furniture has very high requirements on craftsmanship and materials. The selection, drying, finger jointing and splicing of solid wood are very strict. If any process is not strictly controlled, minor cracks and loose joints may occur, and the entire set of furniture may be deformed and become unusable.

3. Melamine board

Melamine board, also known as melamine-impregnated paper-faced wood-based panel, is a decorative board made by soaking paper with different colors or textures in a melamine resin adhesive, drying it to a certain degree of solidification, then laying it on a hardboard surface and heat-pressing it.

This type of board is used as the base material for panel furniture on the market. It can be categorized as either melamine particleboard or melamine density board. Melamine board offers a wider variety of designs and a more personalized feel, making it the preferred material for top European furniture manufacturers. However, the board has stringent environmental requirements, requiring it to meet European E1 standards.

4. Wood board

Blockboard, also known as core board, is a composite material made from natural peeled veneer and solid wood panels, glued and hot-pressed. Depending on the quality of the wood and the texture of the surface material, it can be categorized as "superior," "first-class," or "qualified." The core material can be made from a variety of woods, including poplar, birch, pine, and paulownia.

The surface material can be one or two layers of veneer laminated to either side of the core, and can be categorized as three-ply or five-ply blockboard. Blockboard production can result in issues such as excessive formaldehyde emissions, substandard transverse static bending strength, substandard moisture content, and low gluing strength. Adding a layer of grained 3mm plywood to blockboard and then applying a coat of paint is a common practice in modern woodworking furniture.

5. Hexiang Board

A new type of ecological and environmentally friendly artificial board, which uses rice, wheat and other crop straw from nature as the main raw material. It is healthy and fashionable, and is developed using polyurethane ecological glue that is completely formaldehyde-free and national advanced patented technology.

Hexiang Board is widely used in interior design, furniture manufacturing, flooring, kitchen cabinets, sound-absorbing panels, writing boards, drawing boards, and packaging materials. It is an ideal alternative to wood-based panels. Hexiang Board has a significantly lower water absorption and expansion rate than ordinary boards. Even after boiling in water, it maintains high strength and has a high moisture resistance coefficient. Ordinary boards, on the other hand, crumble easily and have a high expansion rate.

After boiling in water, the Hexiang board has basically no deformation and smells similar to the fragrance of barley tea; ordinary boards absorb moisture, expand and deform, and formaldehyde dissolves in water, emitting a pungent and unpleasant smell.

Extended information

Maintenance and cleaning of the wardrobe cabinet surface. Try to avoid damaging and scratching the wardrobe surface during use. If the surface is accidentally scratched or bruised, you can use cotton cloth dipped in some cigarette ash and a mixture of lemon juice or roasted oil to rub it. After it dries, apply wax for maintenance. If the scratches are deep or the bruises are serious, you need to mix the same color paint to repair the color, or go to a wardrobe store to buy a color corrector and come back to repair it.

Regularly inspect the three-in-one connectors between the wardrobe back and shelves, especially after significant impact. Tighten any loose connections immediately and apply a small amount of lubricant to prevent rust. If a malfunction occurs during secondary disassembly or assembly, notify the dealer or manufacturer immediately for assistance. Avoid impacts or collisions with wardrobe rails or door panels. Push and pull gently, avoiding violent thrusts or collisions.

Cabinets are an important part of life. They can not only store things, but also beautify the environment. It is better to use density boards, solid wood particle boards, solid wood multi-layer boards, ecological paint-free boards, and large core boards as wardrobe boards.

1. Density board

If your home renovation budget is limited, density fiberboard is a good choice. This type of board is a commonly used type of board. Made from powdered wood fibers pressed at high temperatures, it offers excellent flatness. It's soft, impact-resistant, and high-strength. After pressing, its density is uniform and easy to reprocess, making it suitable for applications like blister boards and painted boards.

2. Solid wood particle board

Nowadays, people are very concerned about the environmental friendliness of their interiors, and therefore are extremely careful in their material selection. Many people prefer solid wood particle board when building wardrobes. It is a new, environmentally friendly substrate, produced using the same process as particleboard. Solid wood particle board has a relatively high density and large wood fiber particles, preserving the essence of natural wood. The adhesive content of solid wood particle board is generally less than 5%.

3. Solid wood multilayer board

If your home improvement budget is relatively sufficient, you can also consider using solid wood multi-layer boards. This type of board has a higher production cost. It is made of three or more layers of solid wood veneer or thin boards about one millimeter thick, glued together and hot-pressed. Common ones are three-ply, five-ply, nine-ply and twelve-ply boards.

4. Eco-friendly paint-free board

If you're looking for a cost-effective and healthy home, then eco-friendly boards are a great choice. They've become increasingly popular in recent years, and many choose them when building wardrobes. Also known as Malacca eco-friendly paint-free boards, these solid wood eco-friendly boards offer excellent stability, strong deformation resistance, and strong nail-holding properties.

5. Core board

Blockboard, also known as plywood, is a special type of plywood made from two sheets of veneer joined by wooden strips. This can be considered a thick board and is recommended for cabinet making. Blockboard offers exceptional strength, excellent nail holding power, and excellent sound and thermal insulation. It also has a low moisture content. When choosing blockboard, opt for E1 grade boards; generally, the more attractive the board, the better quality it is.

There are seven kinds of good boards for making cabinets now: 1. Density board (fiberboard); 2. Solid wood particle board; 3. Solid wood multi-layer board; 4. Blockboard; 5. Fir board; 6. Ecological paint-free board; 7. Fireproof board.

1. Density board (fiberboard)

Density board, also known as fiberboard, is primarily made from finely divided wood fibers pressed at high temperatures. It boasts a smooth surface, dense texture, stable performance, impact resistance, and ease of processing, making it widely applicable. However, it's not moisture-resistant and easily expands and deforms when exposed to water, making it unsuitable for kitchen and bathroom cabinets.

2. Solid wood particle board

Solid wood particle board is a relatively new environmentally friendly substrate. Produced using the same process as particleboard, it retains the essence of natural wood and is relatively high-end and environmentally friendly. Its processing performance is comparable to particleboard, and it offers thermal insulation and sound absorption properties. However, its relatively simple production process results in significant quality variation, making it difficult to distinguish between superior and inferior products. Its poor bending and tensile strength make it unsuitable for large cabinets.

3. Solid wood multilayer board

Solid wood multilayer boards are primarily made from three or more layers of one-millimeter solid wood veneers or sheets, glued and hot-pressed. The core material is primarily poplar, mixed wood, and amine wood, offering high strength and stability. Solid wood multilayer boards contain a high amount of glue, so proper edge sealing is required during construction to minimize contamination.

4. Blockboard

Blockboard, also known as core board, has the characteristics of good nail holding power, solid quality, high strength, sound absorption, and thermal insulation. In addition, its low moisture content, smooth surface, no warping, no deformation, and no blistering make it an ideal material for interior decoration and high-end furniture production.

5. Fir board

This is a type of laminated wood, made primarily from large-diameter logs that have been meticulously processed into interlocking, finger-like panels. It can be painted and varnished directly, saving a step compared to blockboard.

6. Eco-friendly paint-free board

Eco-friendly paint-free boards, also known as melamine boards, offer excellent stability, strong deformation resistance, and strong nail holding power. Because they are environmentally friendly and paint-free, they meet modern demands for fast, environmentally friendly, and convenient renovations. They can be used in cloakrooms, closets, wardrobes, cabinets, and other furniture.

7. Fireproof board

Fireproof board is made primarily from siliceous or calcareous materials, mixed with a certain proportion of fiber, lightweight aggregate, adhesives, and chemical additives. It's autoclaved to create decorative panels with a thickness generally ranging from 0.6 to 1.2 mm. Fireproof board is a very economical board with high strength, fire resistance, and moisture resistance. It's widely used in interior decoration, cabinets, laboratory countertops, and other applications.

1. Density board (MDF): Density board is a good board. It is mainly made of powdered wood fiber pressed at high temperature. It has the advantages of smooth surface, impact resistance and high strength. It is suitable for reprocessing. Although it performs poorly in terms of waterproofing, it is a good way to avoid this in the bedroom environment.

2. Solid wood particle board: Solid wood particle board is a very environmentally friendly type of wardrobe board. It has high density, good processing performance, sound absorption and heat insulation functions, the essence of natural materials and excellent nail holding force. It is very suitable for cabinet production. However, the quality of particle boards on the market varies greatly and needs to be correctly identified.

3. Solid wood multi-layer board: The structure of the multi-layer board is made of three or more layers of solid wood veneer hot pressed. The thickness of each layer is about one millimeter. The core material of the board is mainly poplar, eucalyptus, etc. It has high strength, good structure, and good stability. It is very suitable for wardrobe making.

4. Blockboard: Blockboard is one of the most common cabinet panels on the market. It has excellent nail holding force, very good strength, and also has sound absorption and heat insulation functions. It has a low moisture content and is not easy to deform.

5. Hexiang Board: Hexiang Board is a very environmentally friendly board. If used in bedroom wardrobes, it can better create a comfortable, healthy and environmentally friendly sleeping environment. Not only that, its characteristics are also excellent. The surface is flat, smooth and textured, the board surface is solid, uniform and symmetrical, and it has good flame retardancy and weather resistance.

6. Ecological paint-free boards: Environmentally friendly wardrobe boards in the bedroom also include ecological paint-free boards, which are generally made of melamine-coated fir or solid wood. They have excellent stability, good deformation resistance and nail holding strength.

7. OSB: OSB is also known as oriented strand board, which is a fast-growing board, like pine and poplar, which is formed by hot pressing. OSB has low formaldehyde emission and is very strong and durable. It is also excellent for making wardrobes, with advantages such as good flatness and light weight. Moreover, the performance of the wardrobe is also good, with no joints, gaps, cracks, etc., and the internal strength and nail holding ability are extremely high.

When decorating a room, people will also consider putting furniture in it, so that the home decoration will be integrated and can meet our home needs. However, there are many wardrobe panels now, and we are confused when choosing. Let us introduce them to you.

What kind of board is best for making cabinets ? This way we can refer to it and make a more suitable choice.

1. What kind of board is best for cabinets?

Suitable materials for cabinets include solid wood particle board: Solid wood particle board is a new, high-end, and environmentally friendly substrate, manufactured using the same process as particleboard. Advantages: Solid wood particle board has a relatively high density, preserving the essence of natural wood, is environmentally friendly, and offers excellent workability. Disadvantages: Particle board is not very insulating and sound-absorbing, but due to its complex production process, quality varies greatly and is difficult to identify, and its hardness is somewhat inferior.

2. Density board (also known as fiberboard) is a particularly attractive material for cabinets. It is made from wood materials such as tree trunks and branches, or other plant fibers, through hot grinding (ground into powder), gluing (urea-formaldehyde resin or other suitable adhesives), drying, laying, and then hot pressing. Density board has the advantages of various veneers and is subject to significant deformation under long-term loads.

3. Suitable panels for cabinets include moisture-proof board. Moisture-proof board is highly effective. By adding a certain proportion of moisture-proof particles to the particleboard base, the board's expansion when exposed to water is significantly reduced. Moisture-proof board not only shares the advantages of particleboard but also boasts moisture resistance. However, it's important to note that moisture-proof board and ordinary particleboard expand at the same rate when immersed in water. The so-called moisture-proofing only protects against moisture in the air. Moisture-proof board has both.

4. The boards suitable for making cabinets include core boards. Core boards (also known as "blockboards") meet our needs. They are made of two veneers glued together. The middle wood board is made of high-quality natural wood boards that are heat-treated (i.e. dried in a drying room) and processed into wood strips of a certain specification, which are then spliced ​​together by a splicing machine. The spliced ​​wood boards are covered with two layers of high-quality veneer on both sides, and then glued and pressed by cold and hot presses. The total thickness of the veneer glued on both sides of the core board shall not be less than 3mm. The edge and corner defects of all types of core boards shall not exceed 20mm in length.

2. How to choose wardrobe panels

First, the choice of wood panels for on-site carpentry is crucial. While blockboard or finger-jointed fir wood is the most popular choice, other solid wood finger-jointed panels or even wood boards can be selected if your budget allows. However, the most challenging aspect is finding a skilled carpenter and a good design. Otherwise, even if you use good wood panels, they'll be wasted. Recommendation: If you absolutely must, consider hiring a reliable renovation company, or at least a designer. This way, the carpentry can be done on-site, ensuring the wardrobe design is properly overseen. This results in better environmental performance for the same budget.

2. Secondly, the choice of panels for custom wardrobes requires careful consideration. Most custom businesses use solid wood particle boards or multi-layer boards, with few custom-made solid wood products. Solid wood customization is quite expensive. The editor recommends: Don't necessarily go for big-name custom wardrobes. The custom furniture market is also full of fakes, and you might end up wasting money.

When we make wardrobes, we also need to choose the right ones, so that we can ensure that the effect of our decoration is more satisfactory. If you want to continue to know more decoration information, please continue to pay attention to us. We will continue to release decoration information.

What kind of board is used for cabinet decoration?

1. Fireproof board

Fireproof board is made primarily from siliceous or calcareous materials, mixed with a certain proportion of fiber, lightweight aggregate, adhesives, and chemical additives. It's autoclaved to create decorative panels with a thickness generally ranging from 0.6 to 1.2 mm. Fireproof board is a very economical board with high strength, fire resistance, and moisture resistance. It's widely used in interior decoration, cabinets, laboratory countertops, and other applications.

2. Density board (fiberboard)

Density board, also known as fiberboard, is primarily made from finely divided wood fibers pressed at high temperatures. Its smooth surface, fine texture, stable performance, impact resistance, and ease of processing make it widely used. However, it's not moisture-resistant and easily expands and deforms when exposed to water, making it unsuitable for kitchen and bathroom cabinets.

3. Particleboard

Particleboard is a man-made board made by cutting various branches, small-diameter wood, fast-growing wood, and sawdust into pieces of a certain size. After drying, mixing with glue, hardener, and waterproofing agents, and pressing under a certain temperature and pressure, it is called particleboard because of its honeycomb-like cross-section. Advantages: Particleboard offers excellent insulation, sound absorption, and moisture resistance, and has a low coefficient of expansion after absorbing water. It is widely used as a raw material for cabinets, bathroom cabinets, and other products in humid environments.

4. Solid wood multilayer board

Solid wood multilayer boards are primarily made from three or more layers of one-millimeter solid wood veneers or sheets, glued and hot-pressed. The core material is primarily poplar, mixed wood, and amine wood, offering high strength and stability. Solid wood multilayer boards contain a high amount of glue, so proper edge sealing is required during construction to minimize contamination.

What kind of board is good for making wardrobe

What kind of board is good for making wardrobe?

1. Solid wood particle board: Solid wood particle board, as the name suggests, is made by beating solid wood into particles and then gluing and pressing them. It retains some of the physical properties of solid wood, has good nail holding power, and is light in texture. It will not cause too much pressure on the wardrobe, but its bearing capacity is not weak, and it is low in cost and cost-effective. Therefore, it is often used in wardrobe manufacturing.

2. Solid wood: When it comes to wardrobe materials, solid wood is naturally the best. It avoids excessive use of adhesives, is healthier and more environmentally friendly, has strong load-bearing capacity, is safe and stable, and has a long service life, which can reach more than five hundred times that of ordinary board wood wardrobes. It is durable, but solid wood wardrobes are more expensive, so most wardrobes on the market are made of boards or a combination of boards and solid wood.

3. High-density board: High-density board is a commonly used man-made board. It is made by soaking wood, branches and other materials in water, then crushing and pressing them. It has uniform density, high strength and is easier to process. However, its disadvantage is that it has poor moisture resistance and is not suitable for use in humid places such as kitchens and bathrooms. However, it is suitable for making wardrobes.

4. Glulam: This new solid wood material resists deformation. Made from high-quality, imported, large-diameter logs, it's meticulously processed into interlocking, finger-like panels. Due to its unique craftsmanship, this type of board offers superior environmental performance, containing only one-eighth the formaldehyde content permitted in core-based boards. Priced at around 200 yuan per sheet, it's slightly more expensive than high-end core-based boards.

5. Core board: Core board, also known as blockboard, is an excellent material for wardrobe frames. Core board is a plywood with a solid wood core. The inner layer is made of strips of logs, and then the outer layer is clad with topsheets. It has a smooth, flat surface, strong stability, and is not easily deformed. It is generally categorized by thickness into three-ply, five-ply, and nine-ply boards. Thicker boards are more expensive, and you can choose the right one based on the pressure and strength they can withstand.

What are the standards for wardrobe panels?

On December 10, 2001, the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China issued the "Limits of Formaldehyde Emission from Artificial Boards and Their Products for Indoor Decoration and Renovation", which marked E2

5.0mg/L, E1

There are two limit levels: E1 and E2. The products of E1 can be used directly indoors, while the products of E2 must be treated with a surface before they can be used indoors. In 2004, the national standard "Plywood" also marked E0.

The limit level is 0.5mg/L, making E0 the highest standard for formaldehyde emission limits in wood-based panels and their products in my country and internationally. E0-grade panels are permitted for laboratory use.