USD
GBP
EUR
Plate Introduction
LSB high energy home board
Made of high-quality pine wood from Australia
Debarked logs as main material
After degreasing, drying, gluing and directional paving
It is made through twelve processes including hot pressing and forming.
A market-leading
Innovative high-tech sheet products
Large chip/stronger
Product Introduction
Product Introduction
Four reasons for choosing new MDI glue
01
MDI glue does not contain formaldehyde, and the environmental performance of the board is comparable to that of logs
02
MDI glue is insoluble in water and delaminates when in contact with water, effectively waterproofing and moisture-proofing. The resulting boards can be used in kitchens and bathrooms, and can be used as outdoor materials.
03
MDI has high bonding strength, effectively improving the bonding strength and static bending strength of the board
04
MDI raw materials are highly stable and safe and are widely used in people's livelihood areas, including Lycra fibers for clothing and refrigerator liners.
Solid wood core: large planed pieces laid vertically and horizontally in multiple layers
01
Special equipment is used to process the slender planed pieces (generally 40-100mm long, 5-20mm wide, 0.3-0.7mm thick) and then paved in a crisscross pattern. The internal bonding strength is extremely high, so both the center and the edge of the board have super strong nail holding power.
02
260℃ adjustable high temperature hot pressing molding No voids, scars, uniform density, thickness, strength, no warping, no deformation. Because its slices are arranged in a certain direction, the bending strength is high, so it can be used as structural material and can be used as a load-bearing component.
03
The original rosin has no odor. The pine wood itself has a light rosin smell. After peeling, the pine wood does not contain impurities such as bark that are easy to rot. Therefore, there is no pungent smell after the finished board is made.
Passed multiple stringent certifications
LSB high energy home board has passed the most stringent standards for formaldehyde emission of composite wood products, CARB (California Air Resources Board), EPA (EnviroThis indicates that the Auspine factory has established an international quality control laboratory and quality management system, while adhering to the concept of sustainable development of green resources and being responsible for global resources and environment.
Six major product features
Product features
Healthy and environmentally friendly
Made of Australian pine and MDI glue, the production process does not add formaldehyde or other substances harmful to the human body. The green board is good for home health.
Stable performance
MDI glue is insoluble in water and will stratify when it comes into contact with water. Therefore, the boards made from it have good waterproof and moisture-proof properties and are suitable for kitchens, bathrooms and the entire house.
Rosin has no odor
Australian pine itself has a light pine scent. After peeling, the pine does not contain impurities such as bark that are easy to rot, so the finished board has no pungent odor.
Strong load-bearing capacity
The slabs are directional-paved in a crisscross multi-layer structure by continuous flat pressing. The slabs are formed in one piece under the simultaneous action of high temperature and high pressure, so they have high stability.
Strong nail holding force
MDI glue reacts with wood molecules to form strong and irreversible new chemical bonds, which efficiently bond the board and produce strong and tough LSB high-energy home boards, which have excellent nail holding force and deformation resistance.
Easy to process without wasting materials
High-quality Australian pine wood is sliced and then hot-pressed into one piece at high temperature. The density, strength and thickness are uniform, with fewer impurities, making it easier to process and save on cutting materials.
Environmental Protection | Health
high tech