Is it necessary to seal the edges of the panels on all four sides? You'll understand after you move in!

The popularity of customized furniture has led to a significant increase in the total use of panel products in homes. For regular custom manufacturers, the production process of customized furniture has a complete set of strict procedures, among which edge banding is an extremely important step.

Why do we say so? Let’s find out.

Decorate + extend service life

If the edges of the boards are not sealed, the cross-section of the boards will be directly exposed after the custom furniture is completed, affecting the overall aesthetics and reducing the decorative quality. In addition, the fine texture exposed in the cross-section of the boards is prone to harboring dirt and grime, especially after being exposed to moisture and absorbing water, which will directly lead to water infiltration, causing the boards to mold and shortening their service life.

Isolate the inside and outside of the board to control the release of harmful substances

Why do some people's homes smell strongly while others don't, even though the same wood is used to make furniture? Besides choosing the right wood, another possible cause is that the wood is not edge-sealed or that all four sides are not sealed.

Artificial wood panels are held together internally with glue. Even if the release of harmful substances is extremely low, trace amounts of pollutants will still evaporate, and this is a long-term process. Edge sealing can effectively reduce the release of various wood-specific odors and harmful substances from the interior of furniture panels, protecting the health of our families. Edge sealing is not limited to the exposed surface; it must be sealed on all four sides! Ensure a complete seal.

Sealing the panels on all four sides effectively prevents the release of substances within the panels. It also blocks external moisture from entering the panels, preventing them from swelling and deforming due to water absorption. The moisture content of the panels directly determines their resistance to deformation and load-bearing capacity. While typical use involves dealing with water vapor in the air, the waterproofing of the panels on all four sides is even more important in integrated kitchens.

Board products produced by well-known brands on the market are generally reliable in terms of harmful substance release levels. However, low release levels do not necessarily mean that the product is free of harmful substances. How can we better prevent these harmful substances from harming the body? The key is to seal them as tightly as possible within the board product. By sealing the edges on all four sides, the entire board is tightly enclosed, which can indirectly protect indoor air quality.

Important + necessary four-sided edge sealing is essential

Four-sided edge banding protects the panels from direct impact, maintaining the same color and texture across the cross-section and front, enhancing their aesthetics. It also ensures the overall airtightness of the panels, extending their lifespan. Four-sided edge banding also creates smooth, rounded edges that are scratch-resistant. Beyond the rich and beautiful shapes of custom furniture, the rounded edges are a crucial detail that determines their aesthetic appeal.

Whether it is EVA, PUR or more advanced laser edge banding, the most important thing to pay attention to is whether the furniture panels are fully edge-sealed!