Custom-made furniture cabinet doors are prone to deformation? This is how you can avoid it!

Aside from decorative elements like the ceiling and accent walls, the wardrobe is the most prominent feature of any home. With the increasing popularity of custom furniture, custom wardrobes have become a must-have for every home. However, we often see online complaints about newly installed wardrobes experiencing deformation, even before moving in.

(Image from the Internet) Some wardrobe doors are deformed, some are side panels, and some are even the entire wardrobe. Among them, the most common problem is the deformation of wardrobe door panels, especially tall cabinet doors that reach the top.

What are the causes of warping in your cabinet doors? Generally speaking, there are four main reasons for wardrobe door deformation: 1. Material: In modern renovations, cabinet doors are often made of panels, which tend to shrink and swell with moisture. Furthermore, wardrobe doors are relatively large, tall, and have fewer fixing points, making them particularly susceptible to warping, curling, and cracking. 2. Design and Structure: Key factors contributing to door deformation include the rationality of the door's design and uniform stress distribution; compliance with manufacturing process requirements; adequate curing of the adhesive; and proper transportation and storage. 3. Moisture: Excessive moisture content in the wood is also a major cause of door deformation. As the moisture content decreases with use, internal stresses in the wood gradually become apparent, ultimately leading to warping and cracking. 4. Size: With the increasing popularity of minimalist, luxury decor, and the increasing popularity of high, floor-to-ceiling cabinet doors, larger door panels present a higher risk of warping.

So, what kind of board should be chosen to avoid the problem of cabinet door deformation? From a mechanical point of view, the warping and deformation of boards is the result of the release of internal stress, especially for extra-long boards, which are very likely to cause warping and deformation after long-term use. The birth of Huajie Lixin Board provides a new idea for solving the problem of board deformation. Huajie starts from the root of the problem and changes the combination of the solid wood board core of the board. The original multi-layer cross-section wood is changed to multi-layer wood arranged vertically, and the principle of "standing wood supporting a thousand pounds" is cleverly used to fundamentally improve the compression and load-bearing capacity of the board, solving the problem of board deformation. Huajie Lixin Board Ultra-High Board has large-sized boards of 2.85m-3.05m, and there is no pressure from one door to the top.

▲Huajie Lixin Board

In addition, Huajie Lixin board has strong physical properties. The board's deformation resistance, moisture resistance, nail holding strength, etc. have achieved further breakthroughs and upgrades. Whether in terms of materials or craftsmanship, it is enough to meet the modern one-door to ceiling home door panel design's pursuit of excellence and high quality requirements. It also meets the ENF level of environmental protection, making it safer to use.