Core board: strong "core" and no deformation

As we all know, wardrobes are durable products, typically lasting a decade or two. However, if you encounter unscrupulous vendors when ordering custom furniture, you might encounter deformation of the door panels and cabinet body just a few months after installation. This is something no one wants to see. So what are the causes of deformation in wardrobes and other cabinet products? Today, we will take a look at the causes of cabinet deformation.

The cabinet door is deformed and cannot be closed tightly

01. Deformation caused by component stacking

During the production and installation of custom furniture, some operators, for the sake of convenience, randomly stack the panels, or use uneven pads to stack the panels. What's worse, some operators lean the panels against the wall, causing the panels to deform due to their own weight before entering the next process.

02. Deformation caused by processing technology and raw materials

In the production process of the boards required for custom furniture, improper use of factors such as technology (such as moisture content control) and raw materials (non-uniform wood properties) can easily cause cabinet door panels to warp and deform.

03. Improper selection of board products

Among the current whole-house customized products, many cabinet products use super-high panels from top to bottom. This super-high panel places extremely high demands on the material and deformation resistance of the panel. If the panels selected for the whole-house customized cabinet products are not suitable, it is very easy to cause deformation of the cabinet body and cabinet doors, gaps between the panels, and the cabinet doors cannot be closed tightly, which seriously affects the appearance and service life of the product.

Huajie Wood Industry is committed to the production and research and development of new environmentally friendly and high-quality board products. Core board is a new generation of exclusive patented products developed in collaboration with the Institute of Wood Industry of the Chinese Academy of Forestry, Nanjing Forestry University and other research institutes. It took 3 years, thousands of experiments and 52 processes to develop.

Core board

The core board is based on Northeast poplar rotary-cut veneer. After a variety of special processes such as hot pressing, bevel grinding, rib breaking, cutting, and reorganization, it can effectively solve the problem of deformation of home furnishing boards, increase the bearing capacity, and have a stable structure. It is suitable for various large-size products such as swing doors, sliding doors, tabletops, and countertops.

Product picture of custom wardrobe made of core board

The uniqueness of the core board lies in that it changes the combination method of the core of ordinary solid wood boards, replacing the original multi-layer cross-section wood with multi-layer wood arranged vertically, and perfectly applying the principle of "standing wood supporting a thousand pounds", which is equivalent to a piece of board having multiple small upright wooden stakes to bear the weight of objects, thereby improving the board's compression and load-bearing capacity, and solving the problem of furniture deformation in many families due to the poor load-bearing and compression resistance of the board.