The popular full-height cabinets, but worried about the doors deforming? That's because you chose the wrong base material!

"Bedroom Storage" Basics

Equivalent to "wardrobe storage"

As one of the most important furniture products in home life, the wardrobe is also the key storage area in the bedroom space. Expanding the wardrobe storage area has become a common means to increase bedroom storage space. The best way to expand the wardrobe storage area is to build the wardrobe "to the ceiling" to create a "ceiling wardrobe". This maximizes the storage space and makes rational use of the vacant top space, completing the legendary "three-dimensional storage method".

Full-height cabinets are certainly desirable, and doors that reach all the way to the ceiling are even more aesthetically pleasing! However, for furniture manufacturers, the biggest concern is creating doors that resist deformation. After all, even doors made from ordinary planks require straighteners to stabilize them, especially large, full-height doors. Ensuring quality in a single step, keeping pace with their dreams, becomes a challenge and a pain point for furniture manufacturers.

↓↓↓

Understand the principles and recognize cabinet door deformation

From a mechanical point of view, the warping and deformation of the board is the result of the release of internal stress. If effective measures are not taken during the production process, the board will not be able to eliminate the basis for the generation of internal stress, which will lead to warping and deformation when it is placed in an environment of pressure and high humidity after being made into furniture.

At the same time, the probability of long cabinet doors deforming is much higher than that of short cabinet doors. Even adding a "door panel straightener" to the full-length cabinet door cannot completely prevent the door from deforming. Only by better understanding the knowledge of panel materials and knowing the causes of cabinet door deformation can we choose the right panel materials and make a good full-length cabinet.

Board quality

The quality of a wardrobe can be determined by its panels. The quality of the door panels directly impacts the lifespan of the wardrobe. If the physical and chemical properties of the panels are subpar, large-sized doors will inevitably warp.

Cabinet door size

If the cabinet door is too long and not thick enough, it may deform.

Normally, the thickness of the cabinet door panel needs to reach 18mm. If it is less than 18mm and the cabinet door is made higher, the cabinet door will not be able to support the pressure and will deform. This is also the main reason for deformation of the whole high cabinet.

At the same time, the width of the cabinet door also affects the deformation of the wardrobe. If the cabinet door is too wide, the weight of the cabinet will increase, but the bearing capacity of the cabinet hardware is limited. Frequent opening and closing will cause the hardware to deform and eventually wear out the cabinet door.

Installation process

If the installation process is not in place, the wardrobe will suffer in the future. The cabinet door's force structure is uneven, and long-term opening and closing of the cabinet door will definitely cause problems.

Usage Environment

The board is prone to deformation and cracking in damp places, which is determined by its physical properties. Therefore, if the cabinet door is used in a humid environment for a long time, the cabinet door will be damaged to varying degrees.

Qiannianzhou LSB high-energy home board

No need for straighteners to create cabinet doors that are not easily deformed

Full-height cabinets with large door panels are popular with many consumers, but deformation of large cabinet doors remains a persistent problem within the industry. Qiannianzhou has dedicated significant time and effort to creating doors that resist deformation, launching LSB high-energy home panels. This approach provides a new solution to this problem, injecting new vitality into full-height cabinet doors and bringing higher-quality products to furniture manufacturers.

LSB high-energy home board is made of high-quality pine wood as raw material, and is used with formaldehyde-free MDI glue. It is made through processes such as drying, screening, and directional paving. The addition of large flakes effectively offsets the stress within the board, making the board suitable for various environments and improving the problem of furniture deformation caused by cabinet door deformation in home living environments.