USD
GBP
EUR
Furniture panels are mainly man-made panels, including particleboard, density board, finger-jointed board, plywood, etc. The country now has detailed regulations on the specifications and dimensions of furniture panels. The specifications and dimensions of various man-made panels are mainly 1220*2440mm, and the thickness has various specifications. The following introduces the specifications and dimensions of furniture panels for your reference when purchasing.
Furniture panels
Plywood specifications and dimensions
Plywood typically comes in widths and lengths of 1220 x 2440 mm, with thicknesses typically ranging from 3, 5, 9, 12, 15, and 18 mm. Key wood species include camphor, willow, poplar, and tung wood. Plywood is a three- or multi-layered board material made by peeling wood segments into veneers or planing wood into veneers, then gluing them together with adhesive. Typically, an odd number of veneers are used, with adjacent layers glued perpendicular to each other. This results in minimal differences in physical and mechanical properties in the longitudinal and transverse directions. Common types of plywood include three-ply and five-ply. Plywood improves wood utilization and is a key method for conserving wood.
Furniture panels
Finger joint board specifications and dimensions
Finger-jointed lumber, also known as glulam, comes in sizes of 1220 x 2440 mm and thicknesses of 9, 12, 15, 17, 18, and 25 mm. Finger-jointed lumber is made by joining small, deeply processed pieces of solid wood together like fingers. The serrated joints between the planks resemble the interlocking of two fingers. The cross-jointing of the wood strips creates a strong bond, and since there's no need to glue the top and bottom panels together, minimal glue is used. Common woods include fir, pine, camphor, scotch pine, white pine, red pine, elm, hardwoods, maple, and maple.
Furniture panels
Core board specifications and dimensions
Most of the popular core boards currently on the building materials market are solid, glued-together, double-sided frosted five-ply boards. The standard size is 1220 x 2440 mm. Core boards are available in 30, 50, and 90 mm thicknesses. Generally speaking, the thicker the core board, the higher the price. Blockboard, made from two single sheets glued together, is more expensive than thin core boards and has lower flexural strength, but higher transverse flexural strength.
Furniture panels
Density board specifications and dimensions
Density fiberboard, also known as fiberboard, is a man-made board made from wood or other plant fibers, bonded with aldehyde resin or other suitable adhesives. It is categorized as high-density fiberboard (HDF), medium-density fiberboard (MDF), and low-density fiberboard (LDF). Standard specifications for MDF are 1220 x 2440 mm, with thicknesses ranging from 2 to 30 mm. Custom sizes are available.
Furniture panels
Particleboard specifications and dimensions
Particleboard is a thin board made from wood chips with glue and additives. It is divided into two categories: extruded particleboard and flat-pressed particleboard. Particleboard sheet specifications are 1220*2440mm, and the general thickness is 25-45mm.