USD
GBP
EUR
Golden September and Silver October, the peak season for renovation has arrived
When it comes to home decoration, people not only pay attention to the budget and decoration effect, but also care more about the environmental friendliness and durability of the boards.
Today, Dinglida will take you to understand the advantages and disadvantages of relevant boards used to make cabinets, and provide a reference for your home decoration.
There are several main types of boards used to make cabinets for home decoration: density board, particle board, solid wood multi-layer board, solid wood ecological board, and solid wood board.
1. Density board: also known as fiberboard, is made by soaking wood, tree branches and other objects in water and then hot grinding, paving and hot pressing. It is an artificial board made of wood fiber or other plant fiber as raw materials, and applying urea-formaldehyde resin glue or other suitable adhesives.
Advantages of density board:
Good sound insulation, impact resistance, high strength, uniform density, high surface flatness, easy to reprocess
Disadvantages of density board:
Poor waterproof and moisture resistance, poor nail holding force, if the screw becomes loose after tightening, it is difficult to fix it again
Environmental performance:
Due to the particularity of its processing, some benzene and formaldehyde will inevitably remain, which is not very environmentally friendly.
Occasions of use:
It is basically not used for home decoration. Most of the products are used for solid color glossy paint and veneer to make finished low-end furniture.
Recommended factor: ●●
2. Particleboard: also known as particle board, particle board, bagasse board, it is a man-made board made of wood or other wood cellulose materials, which is glued together under heat and pressure after applying adhesive, also known as particle board.
Advantages of particleboard:
1. Good sound absorption and sound insulation performance
2. The interior is a granular structure with a cross-staggered structure. The performance of each direction is basically the same, stable and non-deformed.
3. High surface flatness and small dimensional error
Disadvantages of particle board:
1. The internal structure is granular and not easy to mill;
2. It is easy to cause tooth breakage during cutting, so some processes have high requirements on processing equipment; it is not suitable for on-site production.
3. Poor moisture and waterproof performance, low nail holding force
Environmental performance:
Since the raw materials are wood chips and wood residues, which are bonded together with glue, the amount of glue used is large. The use of high-strength glue results in average environmental performance, with environmental protection coefficients of E1 and E2.
Occasions of use:
Low- and medium-end panel furniture and custom furniture panels are not suitable for on-site decoration
Recommendation index: ●●●
3. Solid wood multi-layer board: also known as plywood, which is a plate-like material made by peeling solid wood into veneers or thin boards, and then drying, selecting materials, gluing, assembling embryos, pre-pressing and hot pressing. It is usually an odd number of veneer layers, with the fibers of adjacent layers of veneer glued perpendicular to each other.
Advantages of solid wood multilayer boards:
1. Light weight, clear texture, insulation, high strength and good stability
2. Easy to construct, not prone to warping, and good mechanical properties
3. Flat, strong nail holding force, not easy to split, good colorability and easy to fix
4. Excellent processing performance, suitable for industrial processing and on-site production
Disadvantages of solid wood multilayer boards:
1. The thickness error is large. Due to the use of wood veneer paving, the thickness difference of the wood veneer and the unstable pressure control of the production, the thickness of the wood veneer varies to a certain extent. The general industry error is about 0.3
2. High cost and expensive construction
3. Labor-intensive products are highly dependent on labor and have relatively low product quality stability.
Environmental performance:
It is made of log veneer glued together. The level of glue determines the environmental protection coefficient. The current mainstream environmental protection level in the market is E1, and brand companies can reach E0, which is relatively environmentally friendly.
Occasions of use:
Customized boards for mid- to high-end furniture, customized matching materials for whole wood, and boards for home decoration
Recommendation index: ●●●●
Blockboard: Also known as core board, it's made from two veneer sheets glued together. The core board is made from dried, square boards processed into strips of a specified standard, which are then joined together using a splicing machine. The joined boards are then covered with two layers of high-quality veneer on each side, which are then glued together using hot and cold presses.
Advantages of blockboard:
1. It has natural wood characteristics and is more suitable for human's natural needs
2. It is light, easy to process and has good nail holding force
3. Good processing performance, suitable for industrial equipment and on-site production and processing
Disadvantages of blockboard:
1. There will be hollows when the board is sawed. Since the core material is made of wood boards, it is inevitable that there will be loose joints depending on the level of core material used.
2. When making door panels in large sizes, deformation will occur. The characteristics of solid wood are that it expands when wet and shrinks when dry.
Environmental performance:
The level of glue used in the board processing process directly affects its environmental performance. The mainstream environmental protection levels in the market are: E1, E0
Application: Special boards for home decoration, high-end customized boards for the whole house
Recommendation index: ●●●●●
5. Solid wood board: Solid wood board is made from whole wood (logs) through sawing, cutting, planing and splicing.
Advantages of solid wood boards:
1. Furniture made of solid wood panels is durable and has a long lifespan
2. The texture is natural and beautiful, with the unique aroma of natural wood
3. Good moisture absorption and air permeability
4. Excellent coating and processing performance
Disadvantages of solid wood boards:
1. Difficult to maintain and easy to deform. According to the changes in climate and humidity, the interior of solid wood furniture will undergo corresponding physical changes, which will directly affect the structure and appearance.
2. It is easy to breed insects and will be eaten by insects if it is not maintained well.
3. Flammable, please take fire prevention measures at home
4. High cost and high price
Environmental performance:
Depends on the environmental protection level of the paint finish on the surface of the furniture, the higher the environmental protection level
Occasions of use:
Suitable for traditional crafts on-site construction and industrial production
Recommendation index: ●●●●
Finished talking about the board categories
Now let’s talk about the environmental protection level of furniture boards
In May 2018, the General Administration of Quality Supervision, Inspection and Quarantine and the Standardization Administration of China officially released the revised GB18580-2017 "Limits of formaldehyde emission from artificial boards and their wood products for interior decoration and renovation materials", abolished the E2 limit standard, stipulated the limit mark E1 standard, and required the limit value to be 0.124 mg/cubic meter to effectively protect the physical and mental health of consumers.
Dinglida gives you a different surprise
1. A Large Brand: Dinglida wood panels belong to Linyi Tianxiang Dingsheng Wood Industry Co., Ltd., formerly Tianxiang Wood Industry Co., Ltd., established in 1999. Located in Linyi, Shandong, a historic city renowned for its wood panel production and logistics, Dinglida has evolved from a single rotary-cut veneer manufacturer into a comprehensive production, sales, and service provider for interior and exterior decorative materials. The company currently occupies over 170 mu (approximately 66 acres) and employs over 800 people. Dinglida has established production and procurement bases in Guangdong, Shandong, and Africa, and owns Dinglida Building Materials Co., Ltd., Linyi Tianxiang Wood Industry Co., Ltd., Linyi Tianxiang Dingsheng Wood Industry Co., Ltd., Huiding International Trading Co., Ltd., as well as overseas panel production bases.
2. Good brand reputation: Dinglida brand was the first in the industry to be insured by China Pacific Insurance Company; and has passed the EU CE certification; after years of development and operation, it has been awarded "Advanced Production and Operation Enterprise", "Contract-abiding and Credit-worthy Enterprise", "China's Famous Brand", "China's Green Environmental Protection Product", "Quality Service Integrity AAA Enterprise", "China's Top Ten Brands in the Panel Industry", "China's Top Ten Brands in Ecological Boards", "China Forest Products Industry Cabinet and Customized Furniture Branch Council Member" and other honorary titles by governments and organizations at all levels. The sales network covers various regions such as North China, East China, South China, and Southwest China, and has formed a good reputation among customers!
3. High plate positioning:
(1) High requirements for material selection, using top-grade board core, dense splicing, smooth surface, no decay, no mildew
(2) The middle board is made of a whole eucalyptus veneer, which has a smooth surface, high hardness and is not easy to deform.
(3) The surface skin is made of imported log peeling technology veneer, which effectively compensates for the individual defects on the surface of the middle board, further improves the surface flatness, and greatly improves the stability of the board
(4) The surface colored paper adopts nano-technology advanced ink paper, which has realistic colors, good wear resistance and no discoloration.
(5) The glue is made using German technology, extracted from natural plant colloids, and chemically converted, exceeding E0 standards and highly environmentally friendly
(6) Introducing domestically advanced heavy-duty plate production lines to meet the needs of the domestic market with high efficiency and quality.
4. Full range of panels
(1) There are many types of boards: the base materials include imported first-grade Malacca, golden fir, fragrant fir, paulownia, and solid wood multi-layer, which can meet the individual needs of different regions and different consumer groups.
(2) Full range of board colors: The company offers 25 patterns and 15 popular patterns, including negative oxygen ion boards suitable for children's rooms.
White, light wood grain, small relief, and large relief are suitable for young people; Tianxiang rosewood, Tianxiang rosewood, and Sofia red are suitable for successful people; and Fallen Leaves Autumn and Pastoral Oak are suitable for middle-aged and elderly people...
(3) Complete supporting facilities: The company launches supporting Roman columns, crown moldings, swing doors, sliding doors, wooden doors, etc. that are consistent with the color of the board. As long as you decorate, Dinglida will provide a complete set of output to meet your comprehensive needs.
(4) A wide range of supporting materials: The company offers hinges, handles, guide rails, steel nails, air nails, self-tapping screws, edge banding glue, nail-free glue, all-purpose glue, etc. for custom furniture, allowing customers to purchase everything in one stop, eliminating the trouble of running around.
5. Thoughtful service output:
(1) Unified store design: Dinglida Panels invites top Italian designers to design the company's unified store image, unified product layout, and unified supporting planning, leading the industry.
(2) Unified VI publicity design: adopt unified planning and design for various advertisements, media, film and television, network, etc., so that the publicity can achieve the desired effect.
(3) Marketing planning: In order to improve the brand influence, Dinglida cooperates with Baidu. Through Baidu search query function, Dinglida brand’s market influence is greatly improved. At the same time, through major network media, a series of promotion linkages are made to help users truly understand Dinglida.
(4) Design service output: What you see is what you get, and you can experience your own home in advance. Dinglida cooperates with 3D Cloud Network to simultaneously launch a 720-degree panoramic experience. Users can first experience the finished product effect and feel the feeling of their own home, and then make selective purchases and consume what they really like.
6. Dinglida corporate culture:
Corporate Vision: To become the first brand of productive plate enterprises
Corporate mission: Let more families use healthy ecological panels
Brand culture: ecology and environmental protection
Corporate values: co-creation and sharing
Corporate philosophy: Satisfy customers and make employees happy
Brand image: Dinglida Ding Environmental Protection
Our commitment: True environmental protection, our word is our bond
We have always established our company with high standards and high requirements, taking the care of consumers' health as our responsibility, constantly innovating, and providing users with higher-end home decoration supporting materials. Your needs have always been our concern.