Is carbon crystal board better or multi-layer board? The difference between carbon crystal board, green crystal board and multi-layer board

Advantages of carbon crystal panels: high environmental performance, long service life, short construction period, no color difference. Disadvantages: expensive, relatively simple door panel styles.

Advantages: 1. High environmental performance.

The product does not need to be painted after coating, which reduces the harm of formaldehyde to the human body and its environmental protection level is higher than the national environmental protection standard .

2. Long service life.

The door is made of new environmentally friendly materials with high hardness and corrosion resistance to ensure a long service life of the product; imported fully automatic mechanized production technology is used to ensure the stability of product quality.

3. Short construction period.

Process Technology

It is stable, has a short production cycle and fast delivery, making it a good choice for those who are in a hurry to move in.

4. No color difference.

The skin-feeling film has a real feel, lifelike patterns and textures, and will not have color difference or texture inconsistency. After a long period of wind and sun exposure, it will still be bright in color without color difference.

Disadvantages: 1. Expensive.

Carbon crystal wooden door is a wooden door made of carbon crystals . It looks like a wooden door made of glass panels and requires a special process to make.

2. The styles and styles of door panels are relatively simple.

Because integrated wall panels are installed in the form of gussets, they are bound to fall off and deform over time, and their shelf life is far shorter than that of traditional wall panels. In general, strip-shaped integrated wall panels are not very suitable for home decoration, as they will affect the aesthetics and easily cause visual fatigue over time.

Good quality.

1. High efficiency, energy saving and long service life.

Carbon crystal heaters offer high insulation efficiency, effectively converting 100% of electrical energy input into over 30% conductive heat and over 65% infrared radiation, resulting in rapid temperature rise and sufficient heat. The highly efficient thermal insulation and heat storage layer ensures high thermal efficiency. Once the set temperature is reached, a comfortable temperature can be maintained for extended periods, even in a power outage.

2. Good heating effect and high thermal efficiency.

The carbon crystal heater is insulated after being powered on. The carbon crystal is the heating element that quickly converts electrical energy into thermal energy and transmits it in a planar manner in the form of far-infrared thermal radiation. The electric-to-heat conversion rate exceeds 98%, and all heat is radiated in the form of 8-15um infrared light waves.

3. Healthy, comfortable and environmentally friendly.

While heating the room, the carbon crystal heater continuously generates far infrared waves. Far infrared rays are a type of radiation that can penetrate deep into the skin and subcutaneous tissue, providing light wave therapy for the human body and are hailed by modern medicine as the "light of life."

The advantages of carbon crystal panels include high environmental performance, long service life, short construction period, and no color difference; the disadvantages are high cost and difficult installation.

advantage

1. High environmental performance. The product does not need to be painted after coating, which reduces the harm of formaldehyde to the human body. The environmental protection level is higher than the national environmental protection standard.

2. Long service life. The door is made of new environmentally friendly materials with high hardness and corrosion resistance to ensure a long service life of the product. Imported fully automatic mechanized production technology is used to ensure the stability of product quality.

3. Short construction period, stable process technology, short production cycle and fast delivery, it is the best choice for you who are in a hurry to move in.

4. There is no color difference, the skin-feeling film looks real, the colors and textures are realistic, there will be no color difference and texture inconsistency. After a long period of wind and sun, the color is still bright and there will be no color difference.

shortcoming

1. If you have a wall-mounted boiler installed at home, it can be used for heating as well as domestic water. However, the carbon crystal plate cannot be used for domestic hot water. It mainly relies on power for heating, which is similar to the installation of an electric heating plate. Therefore, if you want to have domestic hot water at home, you need to install another water heater.

2. In addition, another disadvantage of carbon crystal panels is that they are relatively expensive, mainly because the production of this type of carbon crystal panel is relatively complicated. The larger the apartment area, the higher the installation cost.

3. At the same time, it is also troublesome during installation. If there are any problems later or the installation is not in place, there will be many problems later, which may lead to the problem of not heating.

Carbon crystal boards and solid wood boards each have their own advantages and disadvantages, and the specific choice depends on your needs and personal preferences.

Carbon crystal plate is a new type of material that is light, strong, wear-resistant and easy to clean. It is suitable for people who pursue simplicity and elegance, but its price is relatively high.

Solid wood boards are traditional materials, with features like a thick, natural feel, and good stability. However, they are susceptible to moisture and require regular maintenance.

Therefore, if you focus on appearance and modernity and have a large budget, you can choose carbon crystal boards; if you want a natural feel and a timeless beauty, solid wood boards may be more suitable for you.

Carbon crystal panels are made primarily of carbon crystals. Their advantages are safety , a more evenly distributed temperature, a more comfortable heating experience, and low installation costs. Their disadvantages are the high construction requirements and a shorter service life.

1. Optimal vertical point

1. The main manufacturing material of the carbon crystal electric heating plate is non-metallic inorganic material. It has been tested many times by the National Environmental Protection Testing Center and no harmful substances are emitted during use. In addition, this product releases a large amount of far infrared rays , which has a certain adsorption effect on harmful components such as free benzene in the air of the use environment, and can effectively reduce its concentration and reduce environmental pollution during decoration.

2. The carbon crystal heating plate dissipates heat evenly and heats up quickly. If the heat preservation effect is good, the carbon crystal heating plate can reach a temperature of about 25 degrees in half an hour.

3. The general laying price of a 100-square-meter house is about 10,000 yuan. It does not require maintenance at ordinary times, and the product life is equivalent to the life of the building, which eliminates some intangible costs after installation. Therefore, considering the comprehensive installation, use and maintenance costs, the cost of the carbon fiber heating plate system is really not high.

2. Disadvantages

1. Carbon crystal heating panels have many joints, which are prone to wear and oxidation, making later maintenance difficult and shortening their lifespan . The heating capacity decreases with use, and the installation skills of workers are very high. If the installation is not done well, many problems will arise later, such as high energy consumption and insufficient indoor heat.

2. The carbon crystal heating plate generally lasts about 15 years, which is the heating method with the shortest service life in the electric heating plate system.

Introduction to Carbon Crystal Plate

Carbon crystal heating panels are made by adding far-infrared emitters and temperature-limiting agents to microcrystalline particles using a special process and manufacturing technology. They are suitable for heating homes, office buildings, school dormitories, storefronts, central heating systems, auxiliary heating, chess and card rooms, hospitals, guesthouses, hotels, bathing centers, greenhouses, and warehouses.